TDK Corporation (TSE:6762) has extended its EPCOS ThermoFuse™ family of fuse protected varistors with the new compact NT14 and NT20 series. The new ThermoFuse components feature a footprint that fits into existing circuit board layouts. The NT14 series (disk diameter 14 mm) is designed to absorb maximum surge currents with an 8/20-μs pulse of 6 kA at rated voltages of between … [Read more...]
Mini Burst Field Generator (E)
The P23`s interference pulse runs through and couples to the digital IC inputs under test, like Reset, Clock, Quartz or the respective signal lines. The extremely thin tip of P23 is suitable for testing the finest structures. The coupling takes place capacitively inside the field generator. The tip of the P23 Mini Burst Field Generator is positioned galvanically on the pin … [Read more...]
Optical Sensor AS 350, Analog ± 50 V DC
Optical Sensor AS 350, Analog ± 50 V DC for the potential-free transmission of analog signals from the test object during interference Also new in the product range since this year is the AS 350. The optical analogue probe allows a non-reactive transmission of analogue signals from a test object during interference. The measuring range is ± 50V, the irradiance at> 200 V / … [Read more...]
Probes for Pulse Injection into IC-Die for Immunity Testing and Side Channel Analysis
The Langer EMC technology is pleased to inform you that you can now perform highly accurate immunity tests on the IC die. The ICI L-EFT set consists of a variety of ICI field sources that couple electrical, magnetic fields or contacted current pulses into an open die. This enables a high-precision and high-resolution IC analysis. Furthermore, side channel attacks can be … [Read more...]
Review of MIL-STD-461 CS118 – Electrostatic Discharge
Introduction MIL-STD-461G, released in December 2015, added a test for Personnel Borne Electrostatic Discharge (ESD). Prior to this release, this type of test for electronic systems and sub-systems was managed at the system level under MIL-STD-464C released in 2010. Both of these standards contain similar requirements. MIL-STD-461G provides the details on testing and … [Read more...]
ATEC Provides Solution for IEC/EN 61000-4-31, with Teseq NSG 4031
San Diego, Ca. – October 2, 2018 – Advanced Test Equipment Rentals (ATEC), today announced ATEC provides solution for IEC/EM 61000-4-31, with Teseq NSG 4031. The NSG 4031 broadband immunity test systems are designed for conducted immunity testing in accordance with IEC/EN 61000-4-31. ATEC is the leading rental provider of test equipment for EMC, aerospace, automotive, … [Read more...]
Ultra-High Frequency Clock Oscillator
Waldenburg (Germany), 1 October 2018 – The new IQXO-597 range of clock oscillators recently launched by IQD has an ultra-high frequency range of between 1GHz and 2.2GHz. Housed in a 14.0 x 9.0 x 3.3mm, 6 pad, this surface mount package has an FR4 base with a non-hermetically sealed metal lid. The IQXO-597 is available in three different outputs; Sine, Differential Sine and … [Read more...]
Overview of the DO-160 Standard
In aerospace, there is one standard that always seems to be popping up, DO-160. Aircraft suppliers are often complying with aviation authorities’ regulations by testing their product to DO-160. DO-160 is a standard that was published by the industry group Radio Technical Commission for Aeronautics known as RTCA. RTCA is not a government regulation, however the FAA, EASA and … [Read more...]
ATEC Expands Battery Test Systems Rental Inventory with the Arbin LBT21024
San Diego, CA – September 25, 2018– Advanced Test Equipment Rentals (ATEC), today announced that ATEC expands battery test system rental inventory with the Arbin LBT21024. The Arbin LBT Battery Cycler is a battery testing system for basic charge/discharge cycling, and simulating complex real-world applications such as drive profiles, telecom pulses, or other custom … [Read more...]
Fairview Microwave Debuts New Line of Removable Vertical Launch Connectors with VSWR as Low as 1.3:1
New Solderless Vertical Launch Connectors Provide Maximum Operating Frequency up to 50 GHz LEWISVILLE, Texas - Fairview Microwave Inc., a leading provider of on-demand RF and microwave components, has released a new series of solderless vertical launch connectors that are ideal for high-speed computing, high-speed networking and telecommunications applications. Fairview … [Read more...]
- « Previous Page
- 1
- …
- 27
- 28
- 29
- 30
- 31
- …
- 364
- Next Page »
