A new way to eliminate human inattention R&S®AdVISE is a video-based monitoring/advisory system for use in an EMC test environment. This video detection system is designed to automate the process of visually detecting failures of a device under test (DUT) during immunity testing, eliminating human inattention and saving test time. The system is not limited to an EMC … [Read more...]
RF/EMI Shielded Modular Enclosure
Large Scale • Semi-Permanent • Removable Fabric Panels • Collapsible Entryway • Internal Frame • Anechoic Foam Walls Overview: An RF shielded tent to be used to reduce the radio frequency (RF) environment during Electromagnetic Compatibility (EMC) testing. Meets United States Military - MIL-STD-461G (appendix A): “When equipment is too large or requires special provisions … [Read more...]
Laird’s SuperCool Thermoelectric Assembly Increases Cooling Performance By Up To 60%
Designed for refrigeration applications in medical diagnostics and analytical instrumentation, the high-performance SuperCool Series delivers high heat pumping capacity in a small form factor... August 1, 2018 -- Global technology leader Laird (LRD: London) has launched a high performance thermoelectric assembly (TEA) series for indoor lab environments that offers a higher … [Read more...]
1KW Live Demo at the EMC Symposium 2018
Visit us at Booth 433 for a Hands on Demo of our Model 2170 operating at Full Rated Power! Empower RF Systems is once again conducting live demonstrations of broadband, high power amplifiers with compelling performance, industry leading small size, IOT interface, and user selectable functionality that dares to challenge legacy products offered in the market. Next appearing … [Read more...]
100 kHz-1000 MHz U Series Amplifier, Now Up To 250 Watts!
AR’s new family of “U” (Universal) Series RF solid state Class A power amplifiers now includes a 250 Watt model that covers the 100 kHz-1000 MHz frequency range. These amplifiers are ideal for EMC, laboratory use, antenna & component testing, watt meter calibration, medical/physics research, and more. This compact, high performance & affordable amplifier joins a family … [Read more...]
New Low Cost RF Conducted Immunity System
AR’s CI00402 RF Conducted Immunity System is a self-contained test system used for military, medical, consumer electronics, automotive and aircraft markets. The 9kHz – 400MHz user friendly system eliminates setup issues since it contains a signal generator, spectrum analyzer, 100 watt RF amplifier, external directional coupler and AR emcwARe control software. Learn More … [Read more...]
Class A Single Band 0.8 to 6.0 GHz AS Amplifier Series
We are very pleased to announce the class A single band 0.8 to 6.0 GHz AS amplifier series designed with the new CTS amplifier platform. Key Points Class A operation Mismatch tolerant and unconditionally stable Calibrated dual direction coupler fitted as standard Ethernet, USB, RS232 & GPIB fitted as standard 5 years parts and labour … [Read more...]
Signal and Data Line Filters Designed for Use in MRI Rooms
ITG Electronics introduces Signal and Data Line filters designed for use in MRI Rooms to provide clean power to low voltage signal and data entering MRI Shielded Rooms through power and CAT-5 cables to mitigate interference with MRI scanning equipment operation. Elmsford, NY June 2018 – ITG Electronics, a leading design and manufacturer of CM, DM chokes and Transformers … [Read more...]
Review of MIL-STD-461 CS114– Conducted Susceptibility, Bulk Cable Injection
Introduction This article discusses CS114, including the updates contained in MIL-STD-461 revision “G”, the current revision and the associated nuances that lead to test errors. The fundamental idea behind CS114 testing is to simulate currents induced into cabling from electromagnetic (EM) fields from high level emissions, intentional or unintentional. This test allows an … [Read more...]
New! AMP1122BH — Exodus 6.0-18.0GHz, 100W Solid State Power Amplifier Module for All Lab Applications
Exodus Advanced Communications is pleased to announce the Exodus AMP1122BH, a 6.0 to 18.0 GHz, 50dB gain Solid State Hybrid Module. Featuring instantaneous bandwidth, 5.0dB Peak to Peak flatness and 35A max consumption operating from a 32VDC source, the unit is suitable for all single channel modulation standards and has built-in protection circuits. Other notable … [Read more...]
- « Previous Page
- 1
- …
- 30
- 31
- 32
- 33
- 34
- …
- 364
- Next Page »
