ANSYS, Inc., a global innovator of simulation software and technologies designed to optimize product development processes, announced the release of HFSS 12.0 software, technology for 3-D full-wave electromagnetic field simulation. The product, part of the Ansoft suite, helps engineers design, simulate and validate the behavior of complex high-performance radio frequency (RF), … [Read more...]
Compact Network Analyzer with Wide Frequency Range
Agilent Technologies Inc. recently introduced a compact network analyzer, the Agilent E5061B, which analyzes a frequency range as low as 5 Hz up to the RF (radio frequency) range of 3 GHz. This network analyzer's broad range and versatility eliminates the need for additional low-frequency-dedicated instruments. Applications for the Agilent E5061B, part of the ENA series of … [Read more...]
Field Probes Offer High Performance in Compact Size
Teseq Inc., a developer and provider of instrumentation and systems for EMC emission and immunity testing, now offers two new USB / RS232 electric field probes. The PMM EP-600 and EP-601 active broadband field probes benefit from a true spherical symmetrical dipole configuration. Sampling at a rate of 22 S/s to 0.03 S/s depending on filter settings, the probes’ 6 monopole … [Read more...]
Electroactive Polymers Product Market Worth $2.78 Billion by 2014
Due to its extensive use in electrostatic discharge and electromagnetic interference protection, the conductive plastics segment forms the largest submarket of the overall electroactive polymers market with an expected $2.25 billion by 2014 at a CAGR of 7.3 percent from 2009 to 2014, according to a new market research report, ‘Global Electroactive Polymers Market (2009-2014, … [Read more...]
Field Probes Offer High Performance in Compact Size
Teseq Inc., a developer and provider of instrumentation and systems for EMC emission and immunity testing, now offers two new USB / RS232 electric field probes. The PMM EP-600 and EP-601 active broadband field probes benefit from a true spherical symmetrical dipole configuration. Sampling at a rate of 22 S/s to 0.03 S/s depending on filter settings, the probes’ 6 monopole … [Read more...]
Company Lands $4.5 Million Contract for EMC Testing of EMALS
National Technical Systems Inc. won contracts by General Atomics (GA) Electromagnetic Systems Division (EMS) of San Diego, Calif., for the performance of EMC and environmental testing for the Advanced Arresting Gear (AAG) and the Electromagnetic Aircraft Launch System (EMALS). NTS, under contract to GA EMS, supports environmental qualification testing at GA’s EMS manufacture … [Read more...]
Company to Provide EMI Testing for U.S. Army Electronic Proving Ground
ManTech International Corporation recently announced that it has received a five-year, $286 million contract from the U.S. Army Electronic Proving Ground (EPG) at Fort Huachuca. Under the competitively awarded contract, ManTech will support testing for Command, Control, Communications, Computers and Intelligence (C4I), navigation, and sensor systems for reliability, … [Read more...]
LED Dimmer Power-Converter IC Offers Low EMI
iWatt, Inc., a digital power IC systems products and technology company recently announced the release of the iW3620 Digital Controller for LED lighting applications. The company says it is the industry’s first LED driver IC for 5-40W luminaires with primary side regulation that eliminates the need for an opto-coupler and related components thereby reducing bill-of-material … [Read more...]
EMI Multi-Extrusion Elastomer Shielding Gasket
Laird Technologies, Inc., which designs and manufactures customized, performance-critical components for wireless systems and other advanced electronics applications, announced the release of its new family of multi-extrusion shielding gaskets, EMI GeminiTM. The new EMI Gemini product line is a convergence of a thin, electrically conductive filler elastomer gasket layer and an … [Read more...]
General Guide on Harmonics and Interharmonics Measurements
The IEC recently release a new edtion of IEC 61000-4-7 titled “Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto.”IEC 61000-4-7:2002+A1:2008 applies to instrumentation intended for measuring spectral … [Read more...]
- « Previous Page
- 1
- …
- 273
- 274
- 275
- 276
- 277
- …
- 364
- Next Page »
