The Requirement: When MIL-STD-461 revision “G” was issued, I believed that the answer to many of my measurement equipment calibration issues had been solved. Right there in the “Calibration of measuring equipment” paragraph the requirements clearly stated: After the initial calibration passive devices such as measurement system antennas, current probes, and LISNs, require no … [Read more...]
Pasternack Introduces New RF Hybrid Couplers with Operating Frequency Range up to 40 GHz
Pasternack, an Infinite Electronics brand and a leading provider of RF, microwave and millimeter-wave products, has just expanded its line of RF hybrid couplers with new models that meet the demands for higher frequency components. Pasternack’s hybrid coupler line expansion consists of 21 new models with a high-frequency operating range of up to 40 GHz for wide-band … [Read more...]
Demystifying EMC in an Electric Vehicle’s Drive Unit
1. Introduction The past decade has witnessed both a leap forward in technology and market expansion of the global electric vehicle (EV) industry [1]. With Tesla leading the market, followed by traditional vehicle original equipment manufacturers (OEMs) such as Volkswagen, PSA, and Toyota, to name just a few, the electrification of the automotive industry has been advancing at … [Read more...]
Test 5G Bands without Massive Cost of New RF Equipment and Time to Train RF Engineers
ThinkRF Corp., the leader in software-defined spectrum analysis, today announced the launch of its new ThinkRF D4000 RF Downconverter/Tuner. The platform is the industry’s first 40 GHz downconverter/tuner that offers a frequency range of 24-40 GHz with up to 500 MHz of real-time bandwidth (RTBW), to capture mmWave 5G signals. Now, engineers can quickly and reliably analyze new … [Read more...]
Heilind Electronics Introduces TE Connectivity’s LUMAWISE Endurance S Connector System
Heilind Electronics, a leading global distributor of electronic components and authorized distributor for TE Connectivity (TE), a global leader in connectivity and sensors, introduces TE Connectivity’s LUMAWISE Endurance S Connector System—an ecosystem of products designed for sensor modules and other control system applications. The sensor-ready components of the LUMAWISE … [Read more...]
Analog Devices Announces Combination with Maxim Integrated, Strengthening Analog Semiconductor Leadership
Analog Devices, Inc. (Nasdaq: ADI) and Maxim Integrated Products, Inc. (Nasdaq: MXIM) today announced that they have entered into a definitive agreement under which ADI will acquire Maxim in an all stock transaction that values the combined enterprise at over $68 billion2. The transaction, which was unanimously approved by the Boards of Directors of both companies, will … [Read more...]
Automotive Amplifier Launch CBA 6G-900/600R 0.8 to 6.0 GHz 900/600 W Solid State Amplifier
AMETEK-CT is pleased to announce the launch of the CBA 6G- 900/600R amplifier designed on the CTS amplifier platform under the Teseq product brand. The single band CBA 6G-900/600R CW amplifier has been specifically designed to meet the requirements of the automotive component test market. With optimized saturated output power of 900 watts between1.2-1.4 GHz and 600 watts … [Read more...]
Review of Induced Signal Susceptibility Testing—DO-160 Section 19
The Issue Induced signal susceptibility has been a factor in electronic equipment performance since the dawning of voltage and current. Often referred to as crosstalk, the undesired coupling of one circuit’s signals to another may result in interference that degrades the integrity of either signal. This article examines the testing process prescribed by RTCA DO-160 Section … [Read more...]
KP Performance Antennas Adds New 2-foot and 3-foot Antennas with Mimosa® B11 Mounting Kits to 11 GHz ProLine Parabolic Antenna Line
KP Performance Antennas, an Infinite Electronics brand and a manufacturer of wireless network antennas, has just released new 2-foot and 3-foot antennas with Mimosa® B11 mounting kit options to its new series of ProLine 11 GHz parabolic antennas. KP’s new high-performance ProLine parabolic antennas are ideal for high-density, point-to-point backhaul applications or … [Read more...]
New at Heilind Electronics: Amphenol RF’s Ruggedized ARC Connectors
Heilind Electronics, a premier international distributor of electronic components, has expanded its line of harsh environment interconnects with Amphenol Ruggedized Connectors (ARC). Featuring a 50-ohm impedance and DC to 6 GHz frequency, the new connectors are designed and manufactured by Amphenol RF, a leader in coaxial solutions. The ARC family of connectors offers a … [Read more...]
- « Previous Page
- 1
- …
- 17
- 18
- 19
- 20
- 21
- …
- 364
- Next Page »
