AR is pleased to announce the new, high-power 6000W1000 amplifier, a prime example of AR’s ability to provide high power over the 80-1,000 MHz frequency range. AR has also upgraded three Class A solid-state, broadband amplifiers; models 1000S1G2z5B, 2500A225B, and 5000A225B. The enhanced models power a wide range of applications, including automotive, military, and aviation. … [Read more...]
Two MOPP Compliant IEC Inlet EMC Filters for Medical Applications
Schaffner pleased to announce the launch of the new IEC filter series FN9274. It was specially designed for medical applications. The filter was designed according to Class II medical equipment standard IEC/EN 60601-1. The so-called Two MOPP requirement (Means of Patient Protection) is achieved "out of the … [Read more...]
Single-Phase EMC Filter for Control Equipment
Due to high demand, FN2415, the single-phase filter for control units from Schaffner is available again. Two new versions with adapted performance and lower leakage currents have been added. Typical applications: Large and complex machine tools with multiple driving axes and very long motor cables can be subjected to major reliability problems, provoked by internal … [Read more...]
Space-Saving High-Frequency Inductors with Polarity Marking
Cost-effective RF coils integrated into a multilayer ceramic structure—with WE-MK, Würth Elektronik offers a wide range of SMT inductors with high self-resonant frequency (up to fRES > 10 GHz). WE-MK is available in three different sizes—0201, 0402, and 0603—as well as various inductance values from 1 nH up to 470 nH. The WE-MK inductors have very stable inductance over … [Read more...]
New AR Amplifier Spans 10 kHz to 400 MHz Range With 1000 Watts of Power
AR's new amplifier, Model 1000A400, provides CW power up to 1000 watts, covering 10 kHz-400 MHz. In conjunction with AR's accessories and antennas, the 1000A400 is optimal for reaching today's higher radiated and conducted susceptibility test levels, such as the increased conducted immunity test levels of composite aircraft in the frequency range of 10 kHz-400 MHz, along with … [Read more...]
TMD Introduces a Drop-in Replacement 6-18 GHz, 100 W MPM to Support the U.S. Military’s Radar, EW, and Communications Systems
TMD Technologies, a world leader in RF, microwave, and high-power amplifiers has introduced the PTXM9754, an ultra-compact, modular MPM (Microwave Power Module). This unit is ideally suited for high-performance military radar, EW/EA/ECM, and communications systems. It utilizes a ‘super-mini’ TWT (traveling wave tube), a solid-state preamp, and an optimized high-density … [Read more...]
The Vital Role of Simulation for Virtual EMI and EMC Test Environments
Before deploying microwave and millimeter-wave devices and systems within 5G, the Internet of Things (IoT), and high-speed wireless communication, it is essential to predict their performance. This need has increased the demand for virtual test platforms through simulation software. High carrier and system bus frequencies are necessary for high-data-rate communication … [Read more...]
Ensuring Performance of Connected Home Electronic Products
Towards a Connected Home The title of Bob Dylan’s 1964 hit “The Times They Are A-Changin’” certainly holds true for home appliance products. The world of consumer electronics needs to evolve and keep pace with the growing desire of their customers and play a part in enabling the dream of a truly connected world. The Internet of Things (IoT) trend has finally reached our homes. … [Read more...]
Würth Elektronik Introduces its WE-CST EE4.4 Current Sense Transformers
Würth Elektronik expands the product family of WE-CST current sense transformers with the new WE-CST EE4.4 series. An innovative manufacturing process not only makes these current sense transformers extremely small (4.7 x 4.65, 3.55 mm), but also provides better insulation. Their insulation voltage of 750 VAC, is 50 percent higher than that of market competitors. The WE-CST … [Read more...]
Circuit Level Design and Test for the MIL-STD-461 200 V/m RS103 and the DO-160 Radiated Susceptibility Test at 200 V/m
Introduction For Army, Navy, and Air Force military equipment and DO-160 commercial aircraft avionics, radiated susceptibility test levels as high as 200 V/m may be specified. As always, it is better to design immunity to the test levels into equipment than to wait until equipment is completed and then perform tests. This article assumes the worst-case qualification test … [Read more...]
- « Previous Page
- 1
- …
- 16
- 17
- 18
- 19
- 20
- …
- 364
- Next Page »
