Santa Rosa, California, February 8, 2023 – In times of climate change, there is increasing awareness for the topic of sustainability. But little will be achieved without action. SCHURTER intends to take a new path in this direction and believes its prospects for progress to be excellent. Founded in 1933, the company operates successfully with components for safe energy supply, … [Read more...]
5 Steps to Selecting the Right RF Power Amplifier
Introduction You need an RF power amplifier. You have measured the power of your signal and it is not enough. You may even have decided on a power level in Watts that you think will meet your needs. Are you ready to shop for an amplifier of that wattage? With so many variations in price, size, and efficiency for amplifiers that are all rated at the same number of Watts, many … [Read more...]
Good SI, PI and EMC require this most of all…
Good SI, PI and EMC require a proper, grown-up understanding of electricity... Instead of what circuit designers are taught! As electronic designers, we were taught the children’s version of electricity at school, college, university, etc. This is the version that pretends (just as the SPICE simulator does) that electricity flows as little packets of charge totally inside … [Read more...]
Plugging into a Power Source 93 Million Miles Away
Harwin Gecko-MT 1.25mm pitch Mixed Layout Connectors Connect with confidence with Harwin’s Gecko-MT range; the smallest and lightest mixed-layout connector available for high-reliability applications. The Gecko-MT range combines the 1.25mm pitch Gecko signal connector system with mixed technology layouts, which adds 10A power contacts to the range, providing additional … [Read more...]
An Isotropic Probe for Radiated Susceptibility Measurements from 10kHz to 18GHz and 5V/m to 220V/m
Abstract: Isotropic probes are available for radiated susceptibility test level measurements from 100kHz to 6GHz, 2MHz to 18GHz, 2MHz to 40GHz and 2MHz to 60GHz. For MIL-STD-461 and DO-160 testing a frequency range of 10kHz to 18GHz would be better and a possible solution is presented here. Introduction The probe described in this paper has three separate sections, … [Read more...]
Functional Safety, Risk Management, EMC and EMI
What is Functional Safety? The safety of products, systems and installations can be split into two parts: i) ‘Basic’ safety: electric shock, excessive temperatures, excessive radiation, fire, explosion, implosion, bruising, pinching, crushing, cutting, emissions of toxic fumes, etc. ii) ‘Functional’ safety: when things being controlled don’t function correctly … [Read more...]
Selection of LC Filters to Ensure HEMP Protection of Electronic Equipment
According to military standards, passive electromagnetic LC filters of HEMP are recommended for use in all kinds of special-purpose electronic equipment. Experience gained by military specialists is usually employed when developing HEMP protection means and measures for civil equipment. Does it make sense to use extremely expensive and bulky HEMP filters for civil equipment? … [Read more...]
Doing Things That Usually Do Not Work
“If you’re not making mistakes, then you’re not doing anything.” — John Wooden Over the years, I have seen several things that make me scratch my head. Many of them are things I have done (there, I admitted it). I would like to look at these situations to (maybe) help not to make the same mistakes. So, to be clear: Do not do these things. Concerning Shielding One would … [Read more...]
EMC Confidence Checking
I was recently working with a manufacturer of stand-alone ticket machines, who had big problems with Ethernet-related emissions. Long story short – it was the Ethernet hub they had incorporated in their machine. They had assumed that all CE-marked Ethernet hubs would be equally good for EMC, and they had several different types lying around their design department. We tested … [Read more...]
Mains Harmonic Current Emissions are Always Bad – It is Risky to Rely on the Limits or Exclusions in the Standards
Many (perhaps all) of EMC standards that are listed under the EMC Directive, that set limits for mains harmonic emissions, have exclusions (‘let-outs’) for certain types of equipment, especially: (these examples are from IEC/EN 61000-3-2 Ed.5:2018) Lighting equipment with a rated power of less than but not equal to 5W Equipment with a rated power of 75W or less, e.g. … [Read more...]
- « Previous Page
- 1
- …
- 8
- 9
- 10
- 11
- 12
- …
- 270
- Next Page »
