Santa Rosa, California, November 30th, 2023 – SCHURTER series DG11 and DG12 with and without main filters feature a first-of-its-kind ingress protection solution for IEC inlets, consisting of a seal gasket between the connector and mating V-Lock power cord. The blue colored latch of the V-Lock power cord and blue inlay of the appliance inlet indicate that the two have been … [Read more...]
Customized Wire Harness Solutions by SCHURTER
SCHURTER is pleased to announce its wire harness solutions with ready-to-connect cables, cable bundles and complete wire harnesses with connectors, contacts, or wire-end sleeves. Wire harnessing requires a special electrical engineering know-how to ensure end-to-end quality of product installation and performance. SCHURTER’s widespread offering of components and wire harness … [Read more...]
Connectivity for Off-Road Vehicles- Part 1
Introduction With over 1.4 billion cars worldwide, it is easy to assume that the only product of the automotive industry is the family car. However, the market for industrial, commercial, and agricultural vehicles is not only growing, but it is also embracing the latest technology. Even as these vehicles are becoming increasingly sophisticated, a significant number will … [Read more...]
MSM II – The New Generation of Mechanical Pushbuttons Made of High-Grade Stainless Steel
Santa Rosa, California, September 1st, 2023 – SCHURTER extends its popular momentary pushbutton switch series MSM to include the newest addition, the MSM II. The MSM Metal Line switch family has been successfully used on the market for over 30 years, which is attributed to its durability, precision, and overall high quality. The new generation MSM II stands out even more as it … [Read more...]
Common Errors In, and Some Guidelines to, EMI Testing
Common errors have been seen in EMI testing over a great number of years and the guidelines used for successful EMI Testing GENERAL ERRORS APPLICABLE TO MOST TEST Inadequate testing methods and flagging all possible failures. Reference 3 9.4.11.2.1 details the correct method of functional testing the Equipment Under Test. The shielding of power cables must remain … [Read more...]
Fundamental Oscilloscope Probes
As electronics have become more advanced, so has the equipment used to measure their signal behavior and system performance. In the realm of EMC compliance, oscilloscopes are one of the important tools used to measure signals, hunt down noise sources, and identify time-domain measurements that may contribute to radiated or conducted emissions. Without a properly selected probe, … [Read more...]
The Voltage Rises
Santa Rosa, California, July 24th, 2023 – In the past, automobiles had minimal electrical systems and relied mainly on mechanical systems. Today, there are many electrical functions such as seat heating and cooling, comfort systems, and assistance systems that draw a lot of electricity from the battery. In a 12V vehicle electrical system, higher and higher currents must flow. … [Read more...]
New Touchless Hidden Switch is Concealed Behind Surface
Santa Rosa, California, August 10th, 2023 – SCHURTER introduces the innovative THS switch series with optical sensor technology that can be concealed behind any surface without the need for mounting holes. A small opening in the user interface is all that is needed to allow the ToF sensor to actuate. Equipment and appliances used in public areas has created demand for … [Read more...]
New FXP Fuseholder with Increased Power Ratings Already Fulfills Upcoming IEC Standard
Santa Rosa, California, June 8th, 2023 – SCHURTER, a leading provider of electronic components, is proud to announce its new FXP fuseholder with increased power ratings. The closed fuseholder provides a solution to a longstanding industry challenge that involves power dissipation limitations for fuseholders used at higher operating currents and temperatures. SCHURTER’s new FXP … [Read more...]
Placing a Metal Plate in Front of a EUT May Not Be Enough to Solve Radiated Emissions Exceedances or Radiated Susceptibility Failures
EXAMPLE OF AN EUT WHICH HAS FAILED RADIATED SUSCEPTIBILITY As described in reference 1, the EUT was exposed to a radiated immunity test at a level of 20V/m. The side which contained a vertical metal plate, with an approximately 0.3m x 0.3m dimension and which was electrically isolated from a metal baseplate failed at 12V/m and 300MHz. On the other sides of the EUT, … [Read more...]
- 1
- 2
- 3
- …
- 19
- Next Page »
