AR’s CI00402 RF Conducted Immunity System is a self-contained test system used for military, medical, consumer electronics, automotive and aircraft markets. The 9kHz – 400MHz user friendly system eliminates setup issues since it contains a signal generator, spectrum analyzer, 100 watt RF amplifier, external directional coupler and AR emcwARe control software. Learn More … [Read more...]
Class A Single Band 0.8 to 6.0 GHz AS Amplifier Series
We are very pleased to announce the class A single band 0.8 to 6.0 GHz AS amplifier series designed with the new CTS amplifier platform. Key Points Class A operation Mismatch tolerant and unconditionally stable Calibrated dual direction coupler fitted as standard Ethernet, USB, RS232 & GPIB fitted as standard 5 years parts and labour … [Read more...]
Signal and Data Line Filters Designed for Use in MRI Rooms
ITG Electronics introduces Signal and Data Line filters designed for use in MRI Rooms to provide clean power to low voltage signal and data entering MRI Shielded Rooms through power and CAT-5 cables to mitigate interference with MRI scanning equipment operation. Elmsford, NY June 2018 – ITG Electronics, a leading design and manufacturer of CM, DM chokes and Transformers … [Read more...]
New! AMP1122BH — Exodus 6.0-18.0GHz, 100W Solid State Power Amplifier Module for All Lab Applications
Exodus Advanced Communications is pleased to announce the Exodus AMP1122BH, a 6.0 to 18.0 GHz, 50dB gain Solid State Hybrid Module. Featuring instantaneous bandwidth, 5.0dB Peak to Peak flatness and 35A max consumption operating from a 32VDC source, the unit is suitable for all single channel modulation standards and has built-in protection circuits. Other notable … [Read more...]
New! AMP2065-1 — Exodus 8.0-18.0GHz, 200W Solid State Power Amplifier System for All Lab Applications
Introducing our AMP2065-1 an 8.0-18.0GHz High Power Solid-State Amplifier. The AMP2065-1 system produces 200W of nominal CW power with a gain of 53dB. This “State-of- the-Art” Power Amplifier features our instantaneous wide-band module design with built-in protection circuits for superb reliability and ruggedness. It is packaged in a 7U (12.25”H) Chassis and is nominally 90 … [Read more...]
MVG Launches a New Absorber During the Next IEEE EMC Symposium in Long beach, CA
MVG will reveal its latest generation of absorbers dedicated to EMC testing(Electromagnetic Compatibility) at the IEEE EMC Symposium in Long beach, California, from July 30 to August 3, 2018. TheHyPyr-LossTM Ultra Broadband Absorber is a new generation of absorbers designed to reduce electromagnetic waves over a very wide frequency band. With the arrival of 5G, the move of … [Read more...]
New! AMP1150 — Exodus 2.0-7.0GHz, 70W Solid State Power Amplifier Module for All Lab Applications
Introducing our AMP1150 2.0-7.0GHz High Power Solid-State Amplifier. The AMP1150 module produces 70W of CW power with a gain of 48dB. This is a “State-of- the-Art” Power Amplifier module that features our instantaneous ultra wide-band module with built-in protection circuits for superb reliability and ruggedness. It is of a Small Form Factor Light Weight design suitable for EW, … [Read more...]
New! AMP2085A — Exodus 2.5-8.0GHz, 250W Solid State Power Amplifier System for All Lab Applications
Introducing our AMP2085A 2.5-8.0GHz High Power Solid-State Amplifier. The AMP2085A system produces 250W of CW power with a gain of 54dB. This “State-of- the-Art” Power Amplifier features instantaneous wide-band operation with built-in protection circuits for superb reliability and ruggedness. It is packaged in a 7U (12.25”H) Chassis and is nominally 90 pounds. This System is … [Read more...]
Heilind Electronics Now Stocking Amphenol Aerospace MIL-DTL-38999 Harsh Environment Connectors
Amphenol Aerospace’s MIL-DTL-38999 Series I, II and III subminiature circular connectors are widely used in both commercial and military-aerospace environments WILMINGTON, Mass. -- Heilind Electronics, a leading global distributor of electronic components and authorized distributor for Amphenol Aerospace, is now stocking the manufacturer’s MIL-DTL-38999 Series I, II and … [Read more...]
Knowles PD10730
“The rate of component obsolescence has increased over the last 15 years”, says Steve Hopwood, Senior Application Engineer at Knowles Precision Devices (KPD). “OCMs are discontinuing more part numbers per year for a variety of reasons, including manufacturing changes, changes in die dimensions and other technology changes.” The increase in the number of EOL notices over … [Read more...]
- « Previous Page
- 1
- …
- 22
- 23
- 24
- 25
- 26
- …
- 614
- Next Page »
