This top-level technical and scientific event is the most important English-speaking EU annual EMC symposium and exhibition. The program may be downloaded here: https://www.emceurope2018.org/footer/final-programme-opt.pdf It travels always to a different EU country. About 50% of the submitted papers were rejected in the review process. Close to 600 international … [Read more...]
Mini Burst Field Generator (E)
The P23`s interference pulse runs through and couples to the digital IC inputs under test, like Reset, Clock, Quartz or the respective signal lines. The extremely thin tip of P23 is suitable for testing the finest structures. The coupling takes place capacitively inside the field generator. The tip of the P23 Mini Burst Field Generator is positioned galvanically on the pin … [Read more...]
Optical Sensor AS 350, Analog ± 50 V DC
Optical Sensor AS 350, Analog ± 50 V DC for the potential-free transmission of analog signals from the test object during interference Also new in the product range since this year is the AS 350. The optical analogue probe allows a non-reactive transmission of analogue signals from a test object during interference. The measuring range is ± 50V, the irradiance at> 200 V / … [Read more...]
Probes for Pulse Injection into IC-Die for Immunity Testing and Side Channel Analysis
The Langer EMC technology is pleased to inform you that you can now perform highly accurate immunity tests on the IC die. The ICI L-EFT set consists of a variety of ICI field sources that couple electrical, magnetic fields or contacted current pulses into an open die. This enables a high-precision and high-resolution IC analysis. Furthermore, side channel attacks can be … [Read more...]
Ultra-High Frequency Clock Oscillator
Waldenburg (Germany), 1 October 2018 – The new IQXO-597 range of clock oscillators recently launched by IQD has an ultra-high frequency range of between 1GHz and 2.2GHz. Housed in a 14.0 x 9.0 x 3.3mm, 6 pad, this surface mount package has an FR4 base with a non-hermetically sealed metal lid. The IQXO-597 is available in three different outputs; Sine, Differential Sine and … [Read more...]
D.L.S. Electronic Systems, Inc. receives ACIL Customer Quality Service Award
On October 3, 2018 the American Council of Independent Laboratories (ACIL) announced recipients of the nationwide ACIL Customer Quality Service Award for 2018-2019, and once again D.L.S. Electronic Systems received this award. Developed in 1996 to address the industry's quality issues and recognize those laboratories with exemplary quality performance, the Program provides … [Read more...]
Review of MIL-STD-461 CS118 – Electrostatic Discharge
Introduction MIL-STD-461G, released in December 2015, added a test for Personnel Borne Electrostatic Discharge (ESD). Prior to this release, this type of test for electronic systems and sub-systems was managed at the system level under MIL-STD-464C released in 2010. Both of these standards contain similar requirements. MIL-STD-461G provides the details on testing and … [Read more...]
She’s Back – Barbara L. Judge Comes Out of Retirement to Advise MiCOM Labs
Barbara L. Judge has opted to come out of retirement!! Barbara had been in the regulatory compliance industry for 25+ years when she retired in 2017.While she and her husband thoroughly enjoy traveling the US and Canadain their RV (dubbed “The Ark”) with 3 parakeets, 2 dogs and 1 cat, Barbara found that she missed the challenge of new technologies and the interaction with those … [Read more...]
ATEC Provides Solution for IEC/EN 61000-4-31, with Teseq NSG 4031
San Diego, Ca. – October 2, 2018 – Advanced Test Equipment Rentals (ATEC), today announced ATEC provides solution for IEC/EM 61000-4-31, with Teseq NSG 4031. The NSG 4031 broadband immunity test systems are designed for conducted immunity testing in accordance with IEC/EN 61000-4-31. ATEC is the leading rental provider of test equipment for EMC, aerospace, automotive, … [Read more...]
Ultra-High Frequency Clock Oscillator
Waldenburg (Germany), 1 October 2018 – The new IQXO-597 range of clock oscillators recently launched by IQD has an ultra-high frequency range of between 1GHz and 2.2GHz. Housed in a 14.0 x 9.0 x 3.3mm, 6 pad, this surface mount package has an FR4 base with a non-hermetically sealed metal lid. The IQXO-597 is available in three different outputs; Sine, Differential Sine and … [Read more...]
- « Previous Page
- 1
- …
- 34
- 35
- 36
- 37
- 38
- …
- 650
- Next Page »
