By Kenneth Wyatt, Wyatt Technical Services LLCMore of my clients are starting to use small third-party DC-DC converters to provide the multitude of voltages required for today’s processor and DDR RAM ICs. While these are convenient to drop onto a circuit board, they can be quite a source of radiated and conducted emissions – especially those that switch in the MHz range.I … [Read more...]
Avoid the Most Common Failures with These 7 Essential EMC Design Rules
A reader recently asked me what the top design rules were that they could implement on their product to maximize the chances of passing FCC and CE testing. There’s no doubt that there are countless ways to fail emissions and immunity tests, but a pattern of failure modes did emerge at my EMC lab.Regardless of the type of product I was testing, be it medical, industrial, … [Read more...]
Elephant in the Test Room #1 Continued – The Final Piece in the Conventional Approach
Read other posts in the "Elephant in the Test Room" series here.Recap On this ThreadThe room: MIL-STD RF immunity testing – 1-18GHz 200v/mThe elephant: everyone in the room is aware that a significant fraction of the ‘calibrated’ 200v/m test field is actually created at the wrong test frequency.The culprit: notoriously high ‘start of band’ harmonics produced by all octave band … [Read more...]
