The AS40006 AR System has been specially designed to house, in two, air-conditioned, EMI shielded equipment racks, the AR field generation equipment listed below. An additional control room rack cabinet of desk configuration is provided to house the field measurement and antenna height control equipment. This configuration provides a convenient tabletop location for the control PC, monitor, hardware, mouse, and printer. Input power will be filtered and distributed internally. A fiber-optically isolated GPIB interface is also provided. RF connections will be through bulkhead connectors located in the top of the racks. The frequency matched and dedicated (1 per amplifier) antennas will be mounted and cabled to the antenna mast and be user adjustable for both horizontal and vertical polarization. The SC1000M3, SC1000M4 system controllers allow manual and remote signal routing of RF signals both to and from up to seven amplifiers, including feedback from dual directional couplers. The equipment racks and antenna mast will be mounted on a rolling skid creating a portable field generation platform with a minimum of 60ft of control cable for maneuverability. The side of the equipment rack facing the antennas will be covered in RF absorber to minimize reflection. Model AS40006 Equipment list:
• Model 240S1G4M4, .8–4.2 GHz, 240 Watts CW (Rack 2)
• Model 200T2G8AM2, 2.5–7.5 GHz, 200 Watts CW (Rack 1)
• Model 300T7z5G18M4, 7.5–18 GHz, 300 Watts CW (Rack 2)
• Model 40T18G26AM2, 18–26 GHz, 40W CW (Rack 2)
• Model 40T26G40AM2, 26–40 GHz, 40W CW (Rack 2)
• Model SC1000M4, System Controller, DC–40 GHz (Rack 1)
• Model SC1000M3, System Controller, DC–18 GHz (Rack 1)
• Model PM2003 3-channel Power Meter
• 2 Model PH2010 Power Heads, 30 MHz–40 GHz
• Model FM7004M1, Field Monitor (Control room desk)
• 2 Model FL7040/Kit Isotropic E Field Probes, 2 MHz–40 GHz, 2 – 1000 V/m
• Signal Generator, 100 kHz–40 GHz, rear panel connectors
• Model DC7144A Dual Directional Coupler, 0.8–4.2 GHz, 400 Watt (Rack 2)
• Model DC7280A Dual Directional Coupler, 2–8 GHz, 350 Watt (Rack 1)
• Model DC7450M1 Dual Directional Coupler, 7.5–18 GHz, 3000 Watt (Rack 2)
• Model DC7530 Dual Directional Coupler, 18–26.5 GHz, 300 Watt (Rack 2)
• Model DC7620 Dual Directional Coupler, 26.5–40 GHz, 200 Watt (Rack 2)
• Model ATH800M5GA High Gain Horn Antenna, 0.8 – 5 GHz, 1000 Watts
• Model ATH2G8 High Gain Horn Antenna, 2.5–7.5 GHz, 2800 Watts
• Model ATH7G18 High Gain Horn Antenna, 7.5–18 GHz, 2800 Watts
• Model ATH18G27 High Gain Horn Antenna, 18–26.5 GHz, 350 Watts
• Model ATH26G40 High Gain Horn Antenna, 26.5–40 GHz, 240 Watts
• All internal Interconnect cables between system components
• 17.5 in (44.5 cm) rack space available for user installed equipment (Rack 1)
• Emco Model 2090 Antenna Controller (Control room desk)
• Emco Model 2070 Antenna Tower
• Desktop PC, preloaded with SW1007 software
• Color laser printerRead more from AR.
System Designed to House Field Generation Equipment
