The way in which SPDs are connected can have a large impact on the overall protection provided Bryan Cole Introduction Surge protective devices (spds) or transient voltage surge suppressors (TVSS) are used to reduce the impact of overvoltage transients on the electrical distribution networks found in various industries. Of course, the efficacy of these devices will affect the … [Read more...]
High Gain Microwave Horn Antenna Supplies Constant High Intensity Fields for RFI/EMI Testing
The Model AT4418 from AR RF Microwave Instrumentation is a wideband, high gain, microwave horn antenna that provides a minimum gain of 7 dB over the frequency range of 1 GHz to 18 GHz over isotropic. The Model AT4418 supplies the constant high intensity fields necessary for RFI/EMI field testing within and beyond the confines of a shielded room. It can be used for emissions … [Read more...]
AR Offers New Literature on Conducted Immunity and Automotive Transient Generator Test Systems
AR RF Microwave Instrumentation has released new literature with comprehensive information on its innovative test systems for conductive immunity and automotive transient generator testing. The new brochure includes AR’sCI (Conducted Immunity) Systems, self-contained, all-in-one test systems; and the company’sTGAR Systems for automotive transient generator testing. … [Read more...]
The IEC Advisory Committee on EMC (ACEC): Coordination of International EMC Standards
Since its formation, ACEC has developed a unique structure for EMC publications that is used to this day in the IEC and in other regional standardization organizations. While many EMC engineers are familiar with the electromagnetic compatibility (EMC) standards developed by the International Electrotechnical Commission (IEC), they are probably unaware of how the structure of … [Read more...]
New RF Conducted Immunity System from AR Tests to All Automotive Specifications
AR RF Microwave Instrumentation has introduced the Model CI00401 RF Conducted Immunity system (100 watts nominal / 10 kHz – 400 MHz), a complete, self-contained system for automotive testing.The system contains a signal generator, 3-channel power meter, 100-watts nominal AR amplifier (10 kHz – 400 MHz), directional coupler, and control software. Everything is contained in a … [Read more...]
The Institute of Engineering and Technology’s New Guide on EMC for Functional Safety
A brief introduction... Keith Armstrong, Cherry Clough Consultants, Brockton, Stafford, UK This new publication (August 2008) EMC for Functional Safety published by the Institute of Engineering and Technology (IET) replaces the IEE’s 2000 edition. The Guide comprehensively describes practical and cost-effective procedures that can be utilized by both management and … [Read more...]
Test Instrumentation Firm Rohde & Schwarz Celebrates Its 75th Anniversary
On November 21, 2008 international technology firm Rohde & Schwarz celebrated its anniversary in the company’s Technology Center in Munich, Germany. More than 200 guests from around the world attended. The Prime Minister of the State of Bavaria Horst Seehofer delivered a greeting. Additionally, a glance into the high tech world of 2025 was presented by the American … [Read more...]
More Test Instrumentation Products
Portable EDS Tester Conforms Fully to Different Calibration RequirementsThe ESD3000 from HV Technologies is a lightweight, hand-held battery operated tester. Its modular construction enables testing to many different standards simply by changing the module. A broad range of accessories enables testing to many applications for contact discharge, air discharge, and indirect … [Read more...]
NTS Fullerton Expands Test Capabilities
AR RF Microwave Instrumentation has released new literature with comprehensive information on its innovative test systems for conductive immunity and automotive transient generator testing. The new brochure includes AR’sCI (Conducted Immunity) Systems, self-contained, all-in-one test systems; and the company’sTGAR Systemsfor automotive transient generator testing. … [Read more...]
Lab Offers Three-Day Turnaround for Calibration Services
Intertek Laboratories offer A2LA-accredited calibration services for a wide variety of EMC test equipment including: antennas, attenuators, coupling/decoupling networks, EFT generators, LISNs, RF pre-amplifiers, surge generators, and voltage probes. These labs offer turnaround time of as little as four days, and same-day calibration services are offered for an additional … [Read more...]
- « Previous Page
- 1
- …
- 59
- 60
- 61
- 62
- 63
- …
- 66
- Next Page »