Welcome to the the 2013 Interference Technology EMC Test & Design Guide, where you will find articles on PCB design for low noise and low EMI; Defending Ethernet Ports from Electrical Transient Events; Part One of a National Plan for EMP Protection; a feature story on EMC employment and a world-wide test lab directory. View the issue here. … [Read more...]
New Coupling/Decoupling Networks for EMC RF Conducted Immunity Testing
Teseq, a provider of instrumentation and systems for EMC emission and immunity testing, has expanded its line of CDNs (coupling/decoupling networks) for EMC RF conducted immunity testing, according to IEC/EN 61000-4-6, with several new models—CDN USB 3.0, CDN HDMI, CDN S502, CDN S752 and CDN A801. Designed for use with shielded USB cables, the CDN USB 3.0 is capable of testing … [Read more...]
Faster RF Signal Analysis Using New Vector Signal Analyzer
Test and measurement company Agilent Technologies Inc. has released the M9391A, a 1-MHz to 3- or 6-GHz PXIe vector signal analyzer with up to 160-MHz bandwidth designed to test the latest wireless standards. The M9391A is designed to be used as a complementary product to the M9381A PXIe VSG signal generator for testing and design validation of wireless power amplifiers, … [Read more...]
Dual Channel Function/Arbitrary Waveform Generators Released
Test and measurement instrument provider B&K Precision has announced the launch of its 4050 series, a line of four dual channel function/arbitrary waveform generators. These new instruments can generate waveforms up to 50 MHz for use in education and applications requiring stable and precise sine, square, triangle, and pulse waveforms, with modulation and arbitrary waveform … [Read more...]
Wideband Signal Amplifier for High Frequency, Low Distortion Waveform Amplification
Electronics supplier Saelig Company, Inc. has released the A10150 wideband signal amplifier, an ultra-small footprint, wideband, DC-coupled signal amplifier designed for high frequency, low distortion waveform amplification. Designed as a “snap-on” accessory for the Tabor WaveXciter Models WS8351/2, the A10150 wideband signal amplifier can also be used as a standalone amplifier … [Read more...]
Amplifier Offers Ultra-Broadband Performance in Small Package
A new wideband amplifier has been released by M/A-COM Technology Solutions Inc. (MACOM), a supplier of high performance RF, microwave and millimeter wave products. The MAAM-011109 is suited for any application that requires 50 Ω gain performance from 10 MHz to 40 GHz, including IMS, point-to-point, test and measurement, aerospace, defense and electronic warfare applications, … [Read more...]
Signal Analyzers Now Feature Improved Phase-Noise Performance, Sweep Speed
Agilent Technologies Inc. has announced several enhancements to two of its X-Series signal analyzers, the midrange MXA and general-purpose EXA, including improvements to phase noise. According to the company, the new improvements will help accelerate searches for spurious signals in the testing of transmitters, active antenna arrays and power amplifiers, and allow engineers to … [Read more...]
New 100 A, Three-Phase Burst Pulse CDN for EFT Testing Released
The new 100 A, three-phase burst pulse coupling/decoupling network (CDN) designed electrical fast transient (EFT) or burst testing in the power and telecom industries has been released by Teseq at the IEEE International Symposium on EMC in Denver, Colo. According to Teseq, the compact, lightweight CDN 3083-B100 is “easily” capable of applications that require higher AC and DC … [Read more...]
High-Speed EMI Test Receiver Unveiled
The new ESR26 high-speed EMI test receiver for standard-compliant EMC testing up to 26.5 GHz has been unveiled by Rohde & Schwarz at the IEEE International Symposium on EMC in Denver, Colo. The new R&S ESR26 EMI test receiver covers the 10 Hz to 26.5 GHz frequency range and performs conducted or radiated certification measurements in line with commercial standards such … [Read more...]
Demonstration of EMC Systems and Solutions
EMC systems and solutions provider Teseq will be showcasing several products during the 2013 IEEE EMC Symposium. Representatives from Teseq will demonstrate the following products at booth No. 309 during the symposium: The DC-LISN-M2-100, a high current impedance stabilization network (LISN) for measuring conducted emissions disturbances on DC power ports of photovoltaic … [Read more...]
- « Previous Page
- 1
- …
- 36
- 37
- 38
- 39
- 40
- …
- 65
- Next Page »
