Langer EMV-Technik GmbH has released new SX near-field probes with a frequency range up to 10 GHz enable EMC analysis of interference emitted by electronic boards, components and IC pins with high internal frequencies. High clock rates of 2 GHz, says the company, may result in fifth order harmonics of up to 10 GHz. These harmonics are coupled out by RF sources on the board … [Read more...]
Network Analyzer for Tests RF Passive Components and Dielectric Materials
Agilent Technologies has announced the availability of the E5063A ENA Series network analyzer offering optimized performance and functionality for testing simple RF passive components, such as handset/BTS antennas, RF cables and filters. It can also be used in R&D for evaluation of RF passive devices and dielectric materials. The Agilent E5063A provides excellent RF … [Read more...]
Ultra-Broadband Compact Omnidirectional Antenna Covers 680 MHz to 6 GHz
Aaronia, a provider of EMC test and measurement products, has released the ultra-broadband OmniLOG 70600 compact omnidirectional antenna. Covering a frequency range of 680 MHz to 6 GHz and reaching very high gain up to 6.5 dBi, the new Omni LOG 70600 antenna is compatible with a variety of spectrum analyzer brands, including the SPECTRAN handheld spectrum analyzers. In … [Read more...]
EMS Test Platform Covers Common Frequencies and Field Strengths
EMC test solutions provider Rohde & Schwarz has announced it will be showcasing the R&S CEMS100—the first off-the-shelf solution for EMS testing—and other EMC testing equipment at the International Exhibition with Conference on Electromagnetic Compatibility (EMV 2014) in Duesseldorf, Germany in March. According to the company, the new standardized R&S CEMS100 test … [Read more...]
Rugged Gigahertz Probe for RF and Power Integrity Testing
PacketMicro has expanded its HSProbeTM product family for printed-circuit board testing with a 12-GHz probe. Equipped with rugged BeCu probe tips, the new 12-GHz probe is ideal for RF and power-integrity testing that requires direct probing on top of circuit components or test pads on an uneven surface. "Constant shrinking size of circuit components makes soldering … [Read more...]
Signal and Spectrum Analyzer Features 500 MHz Bandwidth
Rohde & Schwarz has announced the availability of the new R&S FSW-B500 hardware option for all analyzers of the R&S FSW family, enabling measurements in a frequency range up to 67 GHz for applications including research and development, radar and satellite and testing of wireless connections such as WLAN or Beyond 4G (5G). According to the company, the large … [Read more...]
RF Testing Laboratory to Open in Louisiana
The Louisiana Technology Park, located in Baton Rouge, La. will soon house a new radio frequency laboratory on its property. Executive committee members of Research Park Corp. voted this month to devote $160,000 to the initiative that would allow local and regional companies to research and test product prototypes in a closer and more convenient location. Currently, though … [Read more...]
RF Shielding Tent Attains -98.9 dB in 800-2,400 MHz Cellular Band
Select Fabricators, Inc, a provider of RF portable fabric shielding solutions, has achieved IEEE 299 -20061 certification for its Select-A-Shield portable tent enclosure via an independent testing laboratory. Test results include -98.9 dB average RF signal shielding at commonly-used cellular and Wi-Fi frequencies of 800 – 2400 MHz and minimum signal attenuation of -85 dB over a … [Read more...]
Low-Noise Block Converters Extend Frequency Coverage of Existing Receiver/Test Systems
MITEQ, a provider of SATCOM, RF and microwave components, has released the LNB series of low-noise block converters, which supply RF down conversion from 18-40 GHz to intermediate frequencies of 2-16 GHz. Featuring a 4 dB noise figure and internal LO, the LNB series permits processing of very low level input signals and are available in either an 18-26 or 26-40 GHz model. The … [Read more...]
Stand-Alone Generator for Slow Damped Oscillatory Wave Testing
Teseq, a manufacturer of EMC emission and immunity testing instrumentation, has released the NSG 3040-SOW, a new stand-alone generator for slow damped oscillatory wave testing in single phase equipment up to 270 V and 16 A. Ideal for use by power stations, substations, electric meter manufacturers, relays and switch manufacturers as well as EMC testing labs, the NSG 3040-SOW … [Read more...]
- « Previous Page
- 1
- …
- 31
- 32
- 33
- 34
- 35
- …
- 65
- Next Page »
