Coilcraft introduces a new series of shielded high-current power inductors. The MLC75xx Series offers advanced handling, low DCR, Isat ratings up to 59.2 Amps, DC resistance down to 1.2 mOhms, and a reflow temperature of 260 degrees Celsius. They are made of RoHs compliant tin-silver with copper terminations and are not affected by thermal aging. The inductors are ideal for … [Read more...]
Company Expands Military Inductor Offerings
Gowanda Electronics will unveil five new RF inductors for military applications at the Space Tech Expo (booth 2118) on May 19-21 in Long Beach, CA. The inductor series includes: MLRF19M, MLRF21M, MLRF22M, MLRF24M and MLRF28M. The inductor series offers “inductance from 0.47 to 10,000 uH, Q min from 35 to 95, SRF MHz min from 0.95 to 300, DCR Ohms max from 0.06 to 72, and … [Read more...]
IEC 60512-29-100 ed1.0
Publication date: 2015-03-05 IEC 60512-29-100 ed1.0 has been released. The standard is titled, "Connectors for Electronic Equipment - Tests and Measurements - Part 29-100: Signal integrity Tests up to 500 MHz on M12 Style Connectors - Tests 29a to 29g." "IEC 60512-29-100:2015 specifies the test methods for transmission performance for M12-style connectors up to 500 MHz. It is … [Read more...]
New 75 Ohm Test Cables Operate up to 3 GHz
Pasternack releases its new line of 75 Ohm test cables with operation up to 3 GHz. These cables are rugged, provide a secure connection, and offer a low insertion loss of < 0.5 dB at 3 GHz. “Our new 75 Ohm test cables provide customers dealing with cable TV media hardware, set top box manufacturers and broadcast engineers a new cost-effective source for high frequency 75 … [Read more...]
Automotive Industry’s Smallest Transponder Coils Introduced
TDK Corporation Introduces its new EPCOS SMT transponder coils for automotive electronics, which is the smallest in the industry. The coils are extremely compact at 4.5 mm x 3.2 mm x 3.2 mm and offer an inductance of 2.38 mH and high sensitivity of 3.1 mV/µT or 3.5 mV/µT. The coils can also operate on either an X or Y axis at a frequency of 125 kHz. The coils are RoHS … [Read more...]
Method of Implementation Guide Supports USB Connectors and Cables
Keysight Technologies announced its Method of Implementation (MOI) guide is available for USB 3.1 and USB Type-C connectors and cables assemblies for compliance testing. The MOI is a measurement guide of procedures and it simplifies compliance testing and setup. The 10 Gbps USB 3.1 delivers more than double the data rate than the 5 Gbps USB 3.0. The new Type-C connector size … [Read more...]
RF Adapter Line Expanded
Pasternack expands its lines of Microwave and Millimeter Wave Right Angle RF Adapters. These new adapters allow 90 degree turns in tight spaces and function in spaces too small for coaxial cables, thus reducing strain on cables. These adapters are ideal for use in military and commercial industries and in wireless communications, test labs and other space-limited … [Read more...]
High-temperature Power Connectors Meet IEC Requirements
In order to extend its range of IEC high-temperature power inlets and outlets, Schurter introduces its new high temperature inlet and cord connectors series. “The high-temperature appliance inlets and cord connectors are designed according to IEC for 16 A at 250 VAC, and according to UL / CSA for 20 A at 250 VAC,” according to the company. These products are ideal for use in … [Read more...]
SuperMini Connectors Offer High Frequency in Small Footprint
Southwest Microwave has launched its new series of ultra-miniature 0.9 mm SuperMini Connectors. The connectors are rugged, durable and offer high performance in temperatures ranging from -55 to 165 degrees Celsius. These connectors offer high frequency in a small footprint, ultra-broad bandwidth, mode-free operation through 67 GHz and industry low insertion loss, RF leakage and … [Read more...]
ROHS and CHINA-ROHS Compliant Power Connectors Introduced
Schurter introduces its new high-temperature power connectors according to IEC/UL 60320. The appliance inlet, series 1681, offers screw-on or snap-in mounting options. The cord connector is available in two different designs: a straight series (1658) or an angled series (1659). “The high-temperature appliance inlets and cord connectors are designed according to IEC for 16 A at … [Read more...]
- « Previous Page
- 1
- …
- 21
- 22
- 23
- 24
- 25
- …
- 55
- Next Page »
