(May 23, 2016) In preparation of the IEEE EMC 2016 Symposium, the EMC 2016 Advance Program has recently been released for download. This free program will help attendees better plan their trips to this year’s five day EMC symposium. Inside includes all that is in store for the week. The IEEE EMC Symposium is an event for engineers, to provide the knowledge and tools that help … [Read more...]
ASSIST Is Official Archive For MIL-STD Documents
ASSIST is a web site used by standardization management to develop, coordinate, distribute, and manage defense and federal specifications and standards, military handbooks, commercial item descriptions, data item descriptions, and related technical documents prepared in accordance with the policies and procedures of the Defense Standardization Program (DSP). Besides … [Read more...]
New Board-To-FPC Connector Provides Full 360-Degree EMI Shielding
The new Novastack brand 35-HDP Board-to-FPC Connectors from I-PEX have recently been released. They are designed with full 360 degree EMI shielding, and the high-data-rate capability supports all of the new transmission standards, making them ideal for applications with speeds up to 20 Gbps, including USB-3.1, eDP HBR3, PCIe Gen 3 and 4, and ThunderboltTM3. Novastack 35-HDP … [Read more...]
New USB 3.1 Connectors and Accessories
Würth Elektronik eiSos now offers connectors, jacks, and cables for the new USB-3.1 standard. The connectors have an increased data rate of 10 Gb/s instead of 5 Gb/s and a current supply of up to 5 A at 20 V. They are designed for at least 5,000 plugging cycles as well as type-C plugs and jacks (3 A/5 VDC) for at least 10,000 plugging cycles. The jacks are available for 1.0-mm … [Read more...]
Transitioning to New EMC Directive 2014/30/EU
Now that the new EMC Directive 2014/30/EU is mandatory and in effect as of April 2016, what do manufacturers need to do to ensure continued compliance? Elite Electronics Engineering has a five-step plan that explains the recommended steps involved. As a minimum, Elite recommends the following steps to ensure continuing compliance with European EMC requirements: 1. Check … [Read more...]
New 5 uH LISN
The NNB 21 line impedance stabilization network from Langer EMV-Technik is designed for measuring conducted emissions from DC power cables according to the CISPR 25/ISO 7637 standard. The unit was designed primarily for automotive EMC test applications and can be used from 100 kHz to 1 GHz. Two circuits can be measured at the same time or separately. If there are measurements … [Read more...]
New USB Type-C Connectors and Cable Assemblies
Heilind Electronics, the largest distributor of Molex products in the U.S.A., is now stocking Molex USB Type-C shielded I/O connectors and cable assemblies. The more compact design of the Type-C connector offers greater PCB savings, while allowing high-frequency mating in data, consumer, automotive, and industrial I/O applications. Molex USB Type-C connectors support up to … [Read more...]
How to Select the Right EMC Standard for Your Product
Many companies developing products find it difficult to determine the appropriate EMC standard to comply with. The IEC (International Electrotechnical Commission) has developed a web page that explains EMC and offers a tabbed selection method for determining the right standard that applies to your product family. You can then go to their web store and purchase downloadable … [Read more...]
How the IEC is Organized for EMC
International EMC standards can be confusing to the newcomer. The IEC has posted a chart as to how the various standards organizations are organized. The first level of organization is the committees, such as TC77, CISPR, and various product committees. These committees have liaisons with associated standards organizations, such as ISO, ITU, CENELEC, and many others. Many of … [Read more...]
Lightning Induced Transient Tester Available for Rent
Advanced Test Equipment Rentals signed an agreement with EMC Partner to supply the new AVI3000, which is designed to simulate the new MIL-STD-461G CS117 and DO-160 Section 22 recently added requirements for lightning induced transients. The AVI3000 allows full compliance to level 3 for PIN injection and cable bundling tests. All six waveforms reside in the single unit. To … [Read more...]
- « Previous Page
- 1
- …
- 11
- 12
- 13
- 14
- 15
- …
- 53
- Next Page »