A draft from Project IEC 60255-26 is entitled "Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements. This final draft international standard has a voting period of March 21, 2008 to May 23, 2008. Those who purchase the draft, will receive a copy of the definitive version once it is published. Find purchase information at the IEC … [Read more...]
Standards
IEC Issues Draft Standard on Radio Disturbance and Immunity Measuring Apparatus
A draft from Project CISPR 16-1-4 Amd. 2 Ed. 2.0 (2008 - 04) is entitled "Amendment 2 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances. This final draft international standard has a voting period of April 4, 2008 to … [Read more...]
The 3G Group Finalizes 4G Specification
Although not strictly an EMC standard, the efficacy of this new 4G specification will determine the quality of WiFi communications in an ever more crowded spectrum. The 3rd Generation Partnership Project, or 3GPP, has settled on the final specification for the upcoming fourth generation (4G) Long Term Evolution (LTE) for WiFi, which is expected to form the backbone of mobile … [Read more...]
CISPR Specification on Ancillary Apparatus and Measurement of Radio Disturbance
CISPR 16-1-4 Ed. 2 (2008-01) is entitled "Specification for radio disturbance and immunity measuring apparatus - Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated Disturbances." This part of CISPR 1600 is considered a basic standard, which specifies the characteristics and performance for the measurement of radiated … [Read more...]
Semiconductor Devices Filter Standard
IEC 62047-7:2011 describes terms, definition, symbols, configurations, and test methods that can be used to evaluate and determine the performance characteristics of BAW resonator, filter, and duplexer devices as radio frequency control and selection devices. This standard specifies the methods of tests and general requirements for BAW resonator, filter, and duplexer devices of … [Read more...]
Solderless Connections Test Methods Standard
IEC 60352-5:2012 is applicable to solderless press-in connections for use in telecommunication equipment and in electronic devices employing similar techniques. The press-in connection consists of a termination having a suitable press-in zone which is inserted into a plated-through hole of a double-sided or multilayer printed board. Information on materials and data from … [Read more...]
Systems and Software Engineering Standard
ISO/IEC 15026-3:2011 specifies the concept of integrity levels with corresponding integrity level requirements that are required to be met in order to show the achievement of the integrity level. It places requirements on and recommends methods for defining and using integrity levels and their integrity level requirements, including the assignment of integrity levels to … [Read more...]
Semiconductor Devices Filter Standard
IEC 62047-7:2011 describes terms, definition, symbols, configurations, and test methods that can be used to evaluate and determine the performance characteristics of BAW resonator, filter, and duplexer devices as radio frequency control and selection devices. This standard specifies the methods of tests and general requirements for BAW resonator, filter, and duplexer devices of … [Read more...]
Coaxial Communication Cables Standard
IEC 61196-8-1:2012 is part of the IEC 61196 series and applies to coaxial communications cables described in IEC 61196-8. It specifies the requirements for semi-flexible radio frequency and coaxial cables with polytetrafluoroethylene (PTFE) dielectric. These cables are for use in microwave and wireless equipment or other signal transmission equipment or units at frequencies … [Read more...]
Wireless LAN Medium Access Control and Physical Layer Specifications
This revision specifies technical corrections and clarifications to IEEE Std 802.11 for wireless local area networks (WLANS) as well as enhancements to the existing medium access control (MAC) and physical layer (PHY) functions. It also incorporates Amendments 1, 2, 3, 4, 5, 7, 8, 9, and 10 Learn more from TechStreet. … [Read more...]
- « Previous Page
- 1
- …
- 30
- 31
- 32
- 33
- 34
- …
- 69
- Next Page »
