Teseq Inc., a developer of instrumentation and systems for EMC emission and immunity testing, has released the PMM DR-01 double-ridged horn antenna for radiated emissions and immunity applications. The corrosion-resistant PMM DR-01 antenna measures approximately 2.2 in x 1.7 in x 5.4 in and features individual calibration and a nominal impedance range of 50 ohms. According to … [Read more...]
Automotive Interconnect System Offers “High Bandwidth Performance,” Design Versatility
Interconnect solutions developer Molex Inc. has introduced the HSAutoLink II interconnect system for linking multiple high-speed media protocols in automotive electronics, including in-vehicle infotainment, telematic devices, radio and navigation systems, intelligent assistant systems and collision avoidance vision systems. "Popular infotainment and safety features utilizing … [Read more...]
High-Voltage, Buck-Boost Charge Pump Suited for "Low Power, Space-Constrained Automotive and Industrial Applications"
Linear Technology, a manufacturer of high-performance integrated circuits, has released the LTC3245, a 25mA high voltage buck-boost charge pump. According to the company, the LTC3245 is ideally suited for “low power, space-constrained automotive and industrial applications, such as automotive ECU/CAN transceiver supplies, industrial housekeeping supplies and efficient low power … [Read more...]
Synchronous Buck Regulators with Integrated MOSFETS for Single- and Multi-Output Power Supplies
Semiconductor manufacturer Texas Instruments Inc. has announced the release of three 48V synchronous buck regulators with integrated MOSFETs for single- and multi-output power supplies in automotive and industrial applications. According to the company, the new 650mA LM25017, 300mA LM25018 and 100mA LM25019 fly-buck DC/DC converters “feature constant on-time (COT) control … [Read more...]
Interference Mitigation System for Antenna Remoting Applications
Pharad, a developer of small antenna and microwave photonic technologies, has announced the debut of an all-optical interference mitigation system at the 2013 OFC/NFOEC Exposition in Anaheim, Calif., in mid-March. According the company, the new interference mitigation system is the “first all-optical interference mitigation system that can be directly integrated with a fiber … [Read more...]
Compact, Broadband Amplifier for EMC Testing in the Microwave Range
Rohde & Schwarz, a supplier of solutions for test and measurement, broadcasting, radiomonitoring and radiolocation, has released the R&S BBA150 series of amplifiers for EMC testing up to 3GHz. The amplifiers can also be used by manufacturers for non-EMC applications in component production and quality assurance, as well as in research, physical engineering and … [Read more...]
EMP/HEMP Filter to Withstand Pulses Under MIL-STD-188-125-1 Tests
EMI/RFI filter manufacturer Fil-Coil Inc. has announced the release of a 1200A 3-phase electromagnetic pulse/high altitude electromagnetic pulse filter to withstand pulses under MIL-STD-188-125-1 tests. According to the company, the newest FCULN-4x1200 HEMP filter features a voltage rating of 277/480VAC, an operating frequency of 50-60HZ and a dielectric withstanding voltage … [Read more...]
New Series of IEC Inlet Filters Introduced for Switch-Mode Power Supplies, Office and Measuring Instruments, Medical Applications
Japanese electronics company TDK Corp. has announced the expansion of the EPCOS B84771 IEC inlet filter series with two new series. According to the company, the B84773 series features an integrated fuse, while the B84776 series has both a switch and a fuse. According to the company, typical applications for the new IEC inlet filters include “switch-mode power supplies, office … [Read more...]
New Series of TVS Components Protect Portable Consumer Electronic Devices
Semiconductor company ProTek Devices has released a new series of transient voltage suppressor (TVS) components that provide circuit protection for switching transients across the DC line in sensitive electronics, including smartphones, battery chargers and other portable consumer electronic devices. According to the company, the PSDxxHP series “provides electrostatic … [Read more...]
“Small-Footprint” SMP and Mini-SMP Adapters for Use in High-Density Applications
Pasternack Enterprises, a global supplier of RF and microwave products, has released a new line of SMP and mini-SMP adapters for use in “test systems with SMA, 2.92mm or 2.4mm test ports that must interface with a mini-SMP- or SMP-equipped Device Under Test (DUT), . . . millimeter wave systems that require a blind-mate interface for SMA, 2.92mm or 2.4mm connectors and fiber … [Read more...]
- « Previous Page
- 1
- …
- 93
- 94
- 95
- 96
- 97
- …
- 214
- Next Page »
