The QPI-10 from Picor combines the total hot-swap function with an EMI filter for V•I Chip applications. The product aligns with the AdvancedTCA™ PICMG3.0® requirements for hot insertion and board level conducted noise limitations. The EMI filter provides conducted common-mode (CM) and differential-mode (DM) noise attenuation from 150 kHz to 30 MHz. The QPI-10 is designed for use on a 48- or 60-VDC bus (36-76VDC). The in-rush current limit and circuit breaker are designed to satisfy the 200-W per board PICMG3.0® limit up to 70 degrees C PCB temperature around the QPI-10. The under- and over-voltage thresholds can be trimmed separately via the UVEN and OV inputs using external series resistors. The QPI-10 provides two Power Good signals, with one referenced to the input ground and the other to the output ground, which can be used to enable other circuits along with the V•I Chip converter. The QPI-10 is available in a 1.0 x 1.0 x 0.2 inch SiP (System in Package) with LGA mounting. Look for more product information on the Picorwebsite.
V•I Chip Comes With EMI Filter
