Sponsor

Interference Technology

For EMI / EMC Engineers

Sponsor

Shielding

Metalized Fabric Over Elastomeric Gaskets Offered

 

Tech-Etch has been offering Metalized Fabric over Elastomer Gaskets as standard strips with seven different profiles, Standard D-Connectors to shield most 9-pin through 50-pin connectors, and custom configurations die cut to customer specifications. Strips come in many standard sizes for the following profiles: Square, Rectangular, Flat, D, C-Fold, Knife-Edge, and … [Read more...]

Extended Length Die-Cast Enclosures

 

The 1590 die-cast enclosures family from Hammond Manufacturing consists of 41 different sizes in the standard rectangular sizes. Two new sizes, the 1590 BX2, 10 x 2.8 x 1.4 inches (254 x 70 x 35mm) and 1590 BX, 10 x 2.8 x 2.0 inches (254 x 70 x 51mm), have been added. The two new sizes have also been specified in a completely different requirement, a radio antenna splitter, … [Read more...]

Fully-Automated Interference Hunting Solution Available

 

Radio frequency (RF) interference can cause major quality of experience issues for users of communications and broadcast systems Viavi Solutions has developed a fully-automated interference hunting solution, InterferenceAdvisor, that allows an RF engineer to identify and locate an interference sources quickly, using a familiar map-based application on an Android tablet. … [Read more...]

Blog Post – EMC & It’s Role in Reliabilty

 

By Ken Javor Totally anecdotal, but this just happened to me. My wife uses a powered wheelchair. A very high end, high quality chair. We were on vacation driving north and had just crossed the 45th parallel in the state of Michigan. The 45th parallel anywhere is halfway between the equator and the North Pole. In Michigan it’s also halfway to nowhere, and it was there my wife’s … [Read more...]

EMC Standards Package

 

This EMC Standards package includes standards that address the unintentional generation, propagation, and reception of electromagnetic energy, the associated unwanted effects, and the correct operation of different equipment involving electromagnetic phenomena in their operation. In the package: 220+ active, draft, and archived IEEE and ANSI EMC related standards; robust … [Read more...]

B-1B Lancer Returns to BAF for RF Testing

 

(August 11, 2016) The B-1B Lancer was recently brought to the Benefield Anechoic Facility (BAF), the largest anechoic chamber in the world, for testing of its ALQ-161 threat protection system. “The ALQ-161 is a receiver/transmitter that detects and identifies threat radio frequencies then applies the appropriate jamming technique to protect the B-1 while on missions,” reported … [Read more...]

New CENELEC Standards Recently Released

 

Rein Tech Laboratories recently listed several updates to standards in their July 2016 newsletter “MultiPoint”. Among them are the following updates as published by CENELEC. There are additional standards updates listed for IEC and ETSI standards. This is a shortened list of the CENELEC standards published or made available during the past month: EN 62610-5:2016 - 6/24/2016 … [Read more...]

Interference Technology’s Top 5 Articles

 

The top five “clicked-on” articles since 2005 include information on high frequency current probes & applications, RTCA/DO-160 update, electromagnetic interference sources and their most significant effects, designing electronic systems for EMI, and radiated emissions measurements from 1 to 30 meters. To read the articles and more about them, click here. … [Read more...]

EMF Directive – Workplace Health and Safety in Electromagnetic Fields

 

As of July 1, 2016, all EU member states are required to have implemented Directive 2013/35/EU for the protection of persons from electromagnetic fields (EMF) in the workplace in national laws. As a consequence, companies throughout Europe must now ensure that their employees are not exposed to fields greater than the exposure limits, some of which have been newly defined. This … [Read more...]

Sponsor
Sponsor