Sponsor

Interference Technology

For EMI / EMC Engineers

Sponsor

Antennas

Company Brings Sonic Order To Omaha Community Playhouse

 

While the Omaha Community Playhouse has consistently received reviewer accolades for its performances, it has received criticism for its production audio.  Unfortunately, the Omaha Community Playhouse is situated in an area with a lot of RF (radio frequency) activity. An antenna farm nearby is used by the area’s broadcasters, which caused significant interference problems and … [Read more...]

Navy Online Posts Request for Quote for EMI Laboratory Upgrade

 

The U.S. Navy Electronic Commerce Online (NECO) has posted a request for quote for an EMI laboratory Amplifier upgrade to obtain an electric field capacity in the frequency range of 26.5 GHz to 40 GHz to extend an existing MIL-STD-461F, test method RS103 capability. The EMI Lab Frequency Upgrade system needs to produce electric field strength of at least 200 Volts/meter at a … [Read more...]

MILMEGA to Make Presentation with ETS-Lindgren

 

MILMEGA and ETS-Lindgren are co-presenting a topical talk on the challenges of achieving a uniform RF immunity test-field over the 1-6GHz frequency range. Presented by Tom Mullineaux (MILMEGA USA Sales Manager) and Dr. Vince Rodriguez (ETS-Lindgren Senior Principal Antenna Design Engineer), the latest in 3D EM software is used to explore potential solutions in achieving the … [Read more...]

ESD Protection Diodes Target Portable Device Applications

 

The new ESD11N and ESD11B are two new offerings based on ON Semiconductor’s proprietary ESD protection technology. The two chips’ reduced size and bidirectional single-line design provides design flexibility and ease of routing in a variety of space constrained applications. The ESDN11 is a 6-pF device that maintains less than 0.5-dB insertion loss up to 3 GHz, and its … [Read more...]

ESD Protection Diode for RF Antennas

 

The ESD0P2RF-02LS from Infineon Technologies is 0.62 mm x 0.32 mm with a height of 0.31 mm. It can be easily integrated into complete modules and front-end systems. Crafted to protect electronic consumer and communications devices from electrostatic discharge, it can reliably absorb discharges up to 20 kV, a figure that significantly exceeds the industry standard IEC 61000-4-4 … [Read more...]

ESD Protection Diode for RF Antennas

 

The DSD0P2RF-02LS from Infineon Technologies is 0.62 mm x 0.32 mm with a height of 0.31 mm. It can be easily integrated into complete modules and front-end systems. Crafted to protect electronic consumer and communications device from electrostatic discharge, it can reliably absorb discharges up to 20 kV, a figure that significantly exceeds the industry stand IEC 61000-4-4 … [Read more...]

ESD Protection Diodes Target Portable Applications

 

The ESD11N and the ESD11B from ON Semiconductor are two electrostatic discharge (ESD) protection devices housed in its new, ultra-small 0201 Dual Silicon No-Lead (DSN-2) package. The DSN style package, which measures a mere 0.6 mm x 0.3 mm x 0.3 mm, enables 100 percent utilization of the package area for active silicon, offering a significant performance-per-board-area … [Read more...]

MoD Issues Standard on the Safe Use of RF Energy

 

The U.K. Ministry of Defence recently issued DEF STAN 05-74 Issue 3 “Guide to the Practical Safety Aspects of the Use of Radio Frequency Energy.” This defence standard provides guidance on the practical safety aspects of the use of RF energy. Guidance has been included within the Standard for those directly engaged in the design, manufacture, siting, operating, and testing of … [Read more...]

AR’s Impulse Generator, Leak Detector and Noise Meter

 

AR RF/Microwave Instrumentation offers several products for use in EMC testing, including: Variable Rate Impulse Generator: AR’s Model 533X-11M (10 kHz–1 GHz) variable repetition rate impulse generator is a calibrated broadband signal source that is used primarily as a calibrator when performing substitution type interference measurements. It has a variable pulse repetition … [Read more...]

ANSI Slates C63® Pre-Symposium Workshops

 

The ANSI (the American National Standards Institute) Accredited Standards Committee C63® – EMC will present Workshops on C63.4 and C63.5 on August 14 and 15, 2009 just prior to the 2009 IEEE International Symposium on EMC. This year’s topics will include ANSI C63.4 (emission measurements) and ANSI C63.5 (antenna calibration). A new test validation technique using time domain … [Read more...]

Sponsor
Sponsor