From the International Electrotechnical Commission webstore: “IEC 61083-2:2013 applies to software used for evaluation of impulse parameters from recorded impulse voltages and currents. It provides test waveforms and reference values for the software required to meet the measuring uncertainties and procedures specified in IEC 60060-1, IEC 60060-2, IEC 60060-3 and IEC 62475. … [Read more...]
Standards
Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Shielding
From the International Standards Organization webstore: “ISO 17334:2008 specifies the requirements for autocatalytic nickel-phosphorus alloy coatings applied over autocatalytic copper coatings to provide electromagnetic interference (EMI) or electrostatic discharge (ESD) protection for parts fabricated from either plastics or metallic materials. ISO 17334:2008 does not apply … [Read more...]
Alternating Current Disconnectors and Earthing Switches
From the International Electrotechnical Commission webstore: “IEC 62271-102:2001+A1:2011+A2:2013 applies to alternating current disconnectors and earthing switches designed for indoor and outdoor enclosed and open terminal installations, for voltages above 1,000V and for service frequencies up to and including 60 Hz. This consolidated version consists of the first edition … [Read more...]
Test and Measurement Requirements for Single-Mode Fiber, Plug-Style Fixed Attenuator Devices
From the International Electrotechnical Commission webstore: “IEC 61753-051-3: 2013 contains the minimum initial test and measurement requirements and severities [that] a fiber optic attenuator [needs to] satisfy in order to be categorized as meeting the requirements of single-mode fiber, plug-style fixed attenuator devices used in uncontrolled environments. Optical … [Read more...]
Power-Dependent Surface Resistance of Superconductors at Microwave Frequencies
From the “International Electrotechnical Commission” webstore: “IEC 61788-16:2013 [describes] the standard measurement method of power-dependent surface resistance of superconductors at microwave frequencies by the sapphire resonator method. The measuring item is the power dependence of Rs at the resonant frequency. This method is applicable for a frequency in the range of 10 … [Read more...]
Signal Integrity Tests Up to 1,000 MHz on IEC 60603-7 and IEC 61076-3 Series Connectors
From the International Electrotechnical Commission webstore: "IEC 60512-28-100:2013 specifies the test methods for transmission performance for IEC 60603-7 and IEC 61076-3 series connectors up to 1,000 MHz. It is also suitable for testing lower frequency connectors; however, the test methodology specified in the detailed specification for any given connector remains the … [Read more...]
Methods of Measurement and Limits for Radiated Disturbances from Plasma Display Panel TVs in the Frequency Range 150 kHz to 30 MHz
From the International Electrotechnical Commission Webstore: “IEC/PAS 62825:2013(E), which is a publicly available specification, applies to plasma display panel TVs which are intended for use in residential or commercial environments, which have a visible display area with a diagonal dimension of 1 m or greater, and which are within the scope of CISPR 13 or CISPR 32.” “This … [Read more...]
Measurement of Passive Intermodulation in Antennas
From the International Electrotechnical Commission Webstore: “IEC 62037-6:2013(E) defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by antennas typically used in wireless communication systems. The purpose is to define qualification and acceptance test methods for antennas for use in low intermodulation (low IM) … [Read more...]
Measurement of Passive Intermodulation in Filters
“IEC 62037-5:2013(E) defines test fixtures and procedures recommended for measuring levels of passive intermodulation generated by filters [that are] typically used in wireless communication systems. The purpose is to define qualification and acceptance test methods for filters for use in low intermodulation (low IM) applications.” Learn more. … [Read more...]
Requirements for Software for Tests with Impulse Voltages and Currents
This standard covers requirements for software for tests with impulse voltages and currents. This Final Draft International Standard is an up-to-three month’s pre-release of the official publication. Learn more. … [Read more...]
- « Previous Page
- 1
- …
- 25
- 26
- 27
- 28
- 29
- …
- 69
- Next Page »
