Pasternack Enterprises, Inc., an ISO 9001:2008 manufacturer and global supplier of RF and microwave products, introduces its new line of high frequency RF switches. This new line of RF switches is for applications requiring a broad spectrum of frequencies up to 40 GHz. Pasternack broad frequency solid state PIN diode switches are active microwave switch devices that route a … [Read more...]
“Single Destination” Compliance and Debug Testing Solution for PCI Express 3.0 Testing
Test and measurement equipment supplier Tektronix has released an automated transmitter (Tx) and receiver (Rx) compliance and debug testing solution for the PCI Express 3.0 standard. According to the company, the new compliance and debug testing solution is the industry’s “most integrated level of support for PHY layer test automation and debug of PCI Express 3.0.” According … [Read more...]
Lightning Arrestors for Protection of High Power RF Transmission Lines
EMI/EMC solutions supplier NexTek has announced a new series of lightning arrestors for protecting high-power radio frequency (RF) transmission lines, including the HF, VHF and UHF frequency ranges from 0(dc) to 1000MHz. The K1 series offers protection for high-power RF transmission lines of up to 50,000 Watts while the T1 series has a transient rating up to 100,000 … [Read more...]
TVS Diode Arrays for High-Speed Data Line Protection
Circuit protection provider Littelfuse, Inc., has announced a new series of TVS diode arrays for protecting telecommunication interfaces. According to the company, each SR70 Series TVS diode array “is built from four low capacitance, rail-to-rail diodes to provide excellent protection against electrostatic discharge (ESD) and lightning-induced surge damage.” Chad Marak, … [Read more...]
A/D Converter Boards for High Signal-to-Noise Ratio Observation in Multiple Time-Aligned Channels
Data acquisition and synthesis solutions company Ultraview Corporation has released the ULTRADYNE16-250Mx2AVE-8GB-50T/155T and ULTRADYNE16-250x4AVE-8GB-50T/155T 16-bit 4-channel 250-megasample-per-second A/D converter boards for medical, military and scientific applications. According to the company, the A/D converter boards are designed for applications in which signals on … [Read more...]
Power Line Communications Chip Compliant with New EMC Standard
HD-PLC Alliance, an organization comprised of voluntary groups dedicated to promoting the use of fast power line communication (PLC) technology worldwide, has announced that the company’s IEEE 1901 HD-PLC chipsets have been certified as compliant with the new CENELEC EN50561-1 electromagnetic compatibility standard. According to Michimasa Aramaki, President and Chairman of the … [Read more...]
Integrated Circuits for EMI Reduction of Clock Dependent Signals
ON Semiconductor, a supplier of silicon solutions for energy efficient electronics has introduced a new series of active spread spectrum clock generator integrated circuits (ICs) to manage electromagnetic interference (EMI) and radio frequency interference (RFI) and deliver “system-wide EMI reduction of all clock dependent signals.” According to Ryan Cameron, vice president of … [Read more...]
Immunity Tester for Use in EMC Testing Laboratories
Impulse test equipment supplier EMC-Partner has released the IMU3000 Immunity Tester for testing applications in EMC laboratories. According to the company, the IMU3000 provides the ability to “extend test capability with on-side upgrades, reduce service costs and increase system availability.” IMU3000 covers all international standards and combines surge voltages up to 8kV … [Read more...]
Full-Digital Audio Amplifier Eliminates Need for Filtering Circuitry
Semiconductor manufacturer STMicroelectronics has released a full-digital, audio amplifier system-on-chip family for use in dash-mounted sound-system automotive control panels. According to the company, the new full-digital amplifier represents the company’s triumph over traditional cost, pc-board size and EMI issues that have confined automotive class-D applications to … [Read more...]
Multilayer Varistors for ESD Protection in Automotive Electronics
TDK Corporation has released the E series of EPCOS multilayer varistors for electrostatic discharge protection of bus systems in automotive electronics. The new series of multilayer varistors exhibits an operating temperature of up to 150°C with an operating voltage range of 14 V DC to 40 V DC. The E series is compliant with AEC-Q200 and RoHS-compatible. For more … [Read more...]
- « Previous Page
- 1
- …
- 97
- 98
- 99
- 100
- 101
- …
- 212
- Next Page »
