Comtech PST Corp. released the BME69189-20, a solid-state gallium nitride amplifier with high power density meant for electronic warfare, radar transmitters and communications applications in confined spaces. Weighing five pounds, the amplifier has “gain at 20 Watts of more than 41 decibels; maximum RF input overdrive of 10 dbm; and built-in test that includes composite fault … [Read more...]
RF Spectrum Capture and Playback System for Testing, Commercial and Defense Spectrum Management
X-COM Systems, a manufacturer of products and software solutions for electronic warfare, interference analysis, wireless communications and spectrum management, has released the IQC5000A series RF spectrum capture and playback system, “the smallest, lightest, best-performing system available for the capture and playback of RF and microwave signals over short or long time spans … [Read more...]
Product Line Expands with Addition of Four New Amplifiers
Custom MMIC, a developer of performance-driven monolithic microwave integrated circuits (MMICs), has announced the addition of the CMD166 driver amplifier and the CMD164, CMD165 and CMD173 distributed amplifiers to its product family. According to the company, the new amplifiers feature “ultra-wideband performance, low noise figure, low current consumption, and an all positive … [Read more...]
High Current LISN for Measuring Conducted Emissions Disturbances of DC Power Ports
Teseq, a developer and provider of instrumentation and systems for EMC emission and immunity testing, has released the DC-LISN-M2-100, a high current impedance stabilization network (LISN) for measuring conducted emissions disturbances of DC power ports of photovoltaic inverters. According to the company, “[the] unit offers a maximum operating voltage of 1,500 V and measures … [Read more...]
Low Frequency SMP Connectors for Blind-Mate Interconnect Systems and High Density Coaxial Modules
Pasternack Enterprises, Inc., a supplier of RF and microwave products, has released new low frequency SMP connectors for applications requiring operating frequencies of 8 GHz or less, including blind-mate interconnect systems and high density coaxial modules. According to the company, “low frequency 8 GHz SMP connectors carry the same “small-footprint” advantages as their … [Read more...]
High-Side Load Switches for Use in Portable Electronics
Vishay Intertechnology, a manufacturer of discrete semiconductors and passive electronic components, has released two new slew-rate-controlled p-channel high-side load switches designed for 1.5 V to 5.5 V operation. The SiP32458 and SiP32459 are ideal for load switching in portable electronics, including smartphones, GPS devices, digital cameras, media players, notebooks and … [Read more...]
RF Antenna Incorporates Shielded Room as Reverberating Antenna
AR RF/Microwave Instrumentation, a developer of broadband high power, solid state RF amplifiers and microwave amplifiers, has announced the “Cavitenna” RF antenna, a top-loaded monopole antenna that “[utilizes] the shielded room as a reverberating antenna, and the wall as the antenna's ground plane. As a result, it accommodates extremely high power and corresponding field … [Read more...]
EMI Contact Fingers Help Prevent Interference Between Nearby Embedded Systems
Würth Elektronik, a provider of EMC components, has announced the WE-SECF series of EMI contact fingers for the prevention of interference between embedded systems or conductive housings installed next to one another. According to the company, the WE-SECF series is made of copper-berylium and is gold-plated, giving the material a very low resistance and the ability to … [Read more...]
New Shielded Molded M12 Right-Angle Connectors for Data Transmission in Strong Electromagnetic Environments
Belden Inc., a provider of signal transmission solutions for mission-critical applications, has announced the extension of its Lumberg Automation product program in the Americas region to include new molded M12 male and female right-angle connectors with 360 degree shielding for reliable transmission of analog and digital data in environments with strong electromagnetic … [Read more...]
Modular Programmable DC Electronic Load System for Testing DC Power Sources
B&K Precision, a supplier of test and measurement equipment, has released a modular programmable DC electronic load system for testing a variety of DC power sources, including multi-output AC/DC power supplies, batteries, fuel cells, and photovoltaic arrays. The MDL series is “comprised of six modules ranging in power from 200 W to 600 W” that can be installed in varying … [Read more...]
- « Previous Page
- 1
- …
- 89
- 90
- 91
- 92
- 93
- …
- 212
- Next Page »
