Electronic component manufacturer TDK Corporation has released the new ACT1210 series of common-mode chokes for both CAN and FlexRay bus systems. With compact dimensions of just 3.2 mm x 2.5 mm x 2.4 mm and a footprint approximately 45 percent smaller than that of existing components, the new ACT1210 series of common-mode chokes are the world’s smallest, the company said. The … [Read more...]
Electrically Conductive Coatings Provide EMI Shielding
EMI shielding specialist Central Coating Co. Inc. has released two new materials for EMI shielding applications. The first material is an electrically-conductive, one-component, nickel-filled acrylic coating ideal for application on plastics to provide modest EMI shielding and anti-static protection for electronic enclosures and assemblies where abrasion resistance and coating … [Read more...]
Ultra-Low-Height Board-Level EMI Shield for Compact Electronics
EMI solutions provider Laird Technologies has released a new ultra-low-height two-piece board-level EMI shield for compact electronics with small space requirements. The new board-level shield incorporates a frame with a patent-pending drawn latch design that allows for simplified tooling and tighter tolerances. The design accommodates assembly heights as low as 1 mm. “This … [Read more...]
Assemblies Provide EMI/RFI Protection for High-Powered Switching and Rugged Applications
Interconnect solutions provider Molex Inc. has released its new Woodhead MAX-LOC Plus Shielded Cord-Grip assemblies featuring a nickel-plated aluminum housing and shielding ring for EMI/RFI protection. According to the company, the assemblies enable original equipment manufacturers (OEMs) and end-users to connect high-power electrical currents directly to an application with … [Read more...]
New Standard Gain Horn Antennas Operate Up to 40 GHz
Microwave and RF component supplier Fairview Microwave, Inc. has announced the expansion of its line of standard gain horn antennas to provide engineers with a more complete and comprehensive selection for various calibration and testing applications. The company has added seven new gain horn antenna designs ranging in size from WR28 to WR430 with frequencies from 1.7 GHz up … [Read more...]
Stand-Alone Generator for Slow Damped Oscillatory Wave Testing
Teseq, a provider of equipment for EMC emission and immunity testing, has released its new stand-alone generator for slow damped oscillatory wave testing in single phase equipment up to 270 V and 16 A. Ideal for use by power stations, substations, electric meter manufacturers, relays and switch manufacturers as well as EMC testing laboratories that already use Teseq equipment, … [Read more...]
New EMI Cages Introduced as Part of Next-Gen Interconnect Solution
Interconnect solutions provider Molex Inc. has released its new series of EMI cages. Part of the Molex zQSFP+(TM) interconnect solution, which supports next-generation 100 Gbps Ethernet and 100 Gbps InfiniBand Enhanced Data Rate (EDR) applications, the cages are assembled with zQSFP+ SMT connectors and are offered in 1-by-4 ganged and 1-by-6 ganged. The company is showcasing … [Read more...]
TVS Arrays for Circuit Protection in Smartphones
Semiconductor company ProTek Devices has introduced a new series of transient voltage suppressor (TVS) arrays for circuit protection in applications such as smartphones and other portable electronics, USB interfaces and Ethernet 10/100/1000 base T. The new GBLCxxCDN series includes five ultra-low capacitance (3pF typical), low leakage current TVS arrays. The five devices and … [Read more...]
Network Isolator Protects Medical Equipment from EMF and Over-Voltage Accidents
Swiss cabling specialist R&M has introduced the SafeLine network isolator designed to protect patients and medical equipment from disruptive electromagnetic fields and over-voltage accidents. According to the company, the SafeLine network isolator is based primarily on a galvanic separator with a dielectric strength of 4KV AC and is suitable for use in … [Read more...]
Micro DC-DC Converter Series with Embedded Power Inductor and Ferrite Substrate Technology
Electronic component manufacturer Murata Americas today announced the expansion of its LXDC line, a micro DC-DC converter series that utilizes a unique ferrite substrate to embed the power inductor. Ideally suited for applications that require a miniaturized footprint, the new 55F and 55K additions to the LXDC product line deliver ultra-compact size and superior EMI noise … [Read more...]
- « Previous Page
- 1
- …
- 78
- 79
- 80
- 81
- 82
- …
- 212
- Next Page »