Agilent Technologies has announced the Modelithics COMPLETE library of RF and microwave component model libraries is available free of charge for six months to users of Genesys 2014 that are new to Modelithics. The Modelithics COMPLETE library contains over 10,000 RF/microwave components with accurate nonlinear models for active devices and highly scalable linear models for … [Read more...]
USB 3.1 Receiver Test Set Verifies ASIC and Chipset USB 3.1 Receiver Ports
Agilent Technologies has announced the Agilent USB 3.1 receiver test set for use by design and test engineers in the semiconductor and computer industry to accurately characterize and verify USB 3.1 receiver ports in ASICs and chipsets. Released by the USB Implementers Forum in 2013 and expected to appear in products in 2014, the USB 3.1 specification more than doubles … [Read more...]
Automotive Feedthrough Filters Offer High Current Capability
TDK Corporation has introduced new three-terminal feedthrough filters designed to meet the automotive industry’s demands for EMC components in emerging safety and infotainment applications. Capable of withstanding temperatures of up to 125 °C and rated for high currents up to 10 A, the new filters are ideal for noise suppression applications in automotive electronics. … [Read more...]
TVS Arrays Provide Board-Level Circuit Protection in Wireless and Telecom Equipment
ProTek Devices has introduced a new family of multi-line low-capacitance (5pF) transient voltage suppressor (TVS) arrays that provide board-level circuit protection in wireless and telecommunications equipment. The SMP6LLC05-2P - SMP6LLC12-2P series consists of three TVS array components with varying minimum breakdown voltages. The SMP6LLC05-2P has a minimum breakdown voltage … [Read more...]
Low PIM Cable Assemblies Utilize Formable Semi-Rigid Coax
Pasternack Enterprises, Inc., has released a new series of low PIM cable jumpers with formable coax designed for low passive intermodulation (PIM) applications including use in black boxes, test equipment racks and cabinets, distributed antenna systems (DAS), and laboratory testing. Available with two different coax diameters sizes—0.163 and 0.276—and connector options … [Read more...]
Electrically Conductive, Sodium Silicate Coating for EMI/RFI Shielding
Master Bond, Inc. has released MB600G, an aqueous-based, sodium silicate system with graphite filler well suited for EMI/RFI shielding applications. Graphite-filled materials are widely used for shielding and static dissipation applications because of the balance of shielding effectiveness and cost. Shielding effectiveness is most often measured by attenuation. It is defined … [Read more...]
Digital Phase Shifter USB RF Modules for Economical Configurable RF Test Measurements
Saelig Company, Inc. is now offering Telemakus’ TEP2000-4and TEP4000-5 digital phase shifters for applications including testing of phased array antennas and other RF equipment. These laboratory-quality phase shifters feature minimum phase range of 360 degrees (400 degrees typical) with 12-bit, 0.25 degree resolution. The TEP2000-4 operates over the bandwidth of 1 to 2 GHz, … [Read more...]
RF Rotary Joints Prevent Cable Entanglement During Antenna Testing
Microwave and RF product supplier Fairview Microwave has released a new line of single channel/single-axis and single-channel/multi-axis RF rotary joints. Fairview’s RF rotary joints are designed to be used wherever RF signals have to be transmitted between stationary and moving parts of a system, including commercial and military radar, land-mobile radio communications and … [Read more...]
EMI/RFI Filter Sample Kits for Microwave Applications
CTS Tusonix, a subsidiary of CTS Corporation, has released two new EMI/RFI filter sample kits for microwave applications. The 4300-900 kit contains ten parts from CTS’ solder-mount EMI/RFI 4300 series, which are designed with minimum capacitance from 10 pF to 27 nF, 300 working voltage DC at 85°C and 200 working voltage DC at 125°C. The 4306-900 kit contains ten parts from … [Read more...]
GaN-Based Amplifiers Up to 18 GHz and 1,000 W Output Power
API Technologies, a provider of high performance RF/microwave, power, and security solutions for critical and high-reliability applications, has expanded its line of gallium nitride-based amplifiers to include models that operate with output power levels up to 1,000 watts and frequencies to 18 GHz. Suitable as cost-effective replacements for traveling wave tube (TWT) … [Read more...]
- « Previous Page
- 1
- …
- 69
- 70
- 71
- 72
- 73
- …
- 212
- Next Page »
