The patented “Easy Access” RF shield from Photofabrication Engineering, Inc. (PEI) incorporates an etched slot that is straight or staggered to minimize RF leakage. The tab connecting the lid to the RF shield can be easily snipped for access and then can be re-soldered in seconds for minimal downtime. Covers are manufactured from SAE 1010 with solder plating and can be bent … [Read more...]
More Shielding Products
Line of Silicone and Fluorosilicone Elastomers Offers Variety of Design OptionsConductive elastomers from UK-based Kemtron Ltd. are fully post cured silicones or fluorosilicones with highly conductive particles that provide low contact resistance between mating surfaces. The various fillers have been chosen to ensure galvanic compatibility between the surfaces. Extruded … [Read more...]
Expanded Line of IEC Inlet Filters Includes Higher Attenuation Models
An expanded line of IEC inlet filters from Schaffner EMC includes two new versatile models that offer up to 10 dB better attenuation than other versions in the series. The new FN9244 and FN9244E (with an integrated choke for additional EMI suppression on the earth line) offer a current rating of up to 15 A with an inductance up to 59.5 mH. These devices are well suited for use … [Read more...]
Form-in-Place Gaskets Feature Special, Silicone-Based Pastes
EMI Sentry™ from Laird Technologies is a new family of form-in-place gaskets consisting of SNK55-RXP, a silicone with silver/copper that cures at room temperature; SNK60-HXP, a silicone with silver/copper that cures in an oven; SNL60-RXP, a silicone with silver/aluminum that cures at room temperature; and SNL70-HXP, a silicone with silver/aluminum that cures in an oven. These … [Read more...]
Rugged Capacitors Boast Life Expectancy of 300,000 Hours
The B25836B*A305 Series from EPCOS is an especially rugged line of PFC (power factor correction) capacitors. They are based on EPCOS’ proprietary MKV technology and are distinguished by their high temperature tolerance and long operating life. These capacitors are available for voltages of between 400 and 800 V at 50/60 Hz. Their reactive power ranges between 5 and 30 kvar. The … [Read more...]
Multilayer Ceramic Capacitors Available in ESD-Resistant Version
The new E-series of multilayer capacitors from EPCOS is based on X7R material to create highly rugged and durable components. They are characterized as highly resistant to ESD pulses. With low capacitance values down to 1 nF, the E-series offers protection from EMI up to 300 MHz. With such low capacitance, these devices can also be used to implement ESD-resistant low-pass … [Read more...]
Input Attenuator Module Meets Conducted Emissions Specs of MIL-STD-461/C/D/E
The MI-IAM input attenuator module from Vicor Corporation is an accessory product to that company’s MI-200 and MI-J00 DC-DC converters that provide EMI filtering and transient protection. Designed for use with all 28- and 278-volt input converters, the MI-IAM can drive any number of modules with output loads up to 200 watts. This device meets the conducted emissions … [Read more...]
MORE MILITARY PRODUCTS
Ruggedized Flat Panel Computer Is MIL-STD-461D CompliantThe NAG 20-inch MIL-SPEC flat panel computer from NAG Marine is a fully sealed NEMA 4X unit crafted specifically for harsh marine and/or engine room environments. The unit is built with low power consumption electronics for maximum heat efficiency and shock isolated components for elimination of the effects of shipboard … [Read more...]
Ruggedized Flat Panel Computer Is MIL-STD-461D Compliant
The NAG 20-inch MIL-SPEC flat panel computer from NAG Marine is a fully sealed NEMA 4X unit crafted specifically for harsh marine and/or engine room environments. The unit is built with low power consumption electronics for maximum heat efficiency and shock isolated components for elimination of the effects of shipboard vibration. The unit is fully qualified under MIL-STD 461D … [Read more...]
Aluminum Electrolytic Capacitors Feature a Self-Healing Electrolyte
A recently released series of surface-mount aluminum capacitors from Vishay Intertechnology target high-density PCB applications. The ECL series feature a non-solid, self-healing electrolyte. For high temperature operation, a heat-resistant pad and molded base plate provide additional stability and protection. These capacitors offer low impedance down to 90 mΩ at 100 kHz, a … [Read more...]
- « Previous Page
- 1
- …
- 194
- 195
- 196
- 197
- 198
- …
- 212
- Next Page »
