HAEFELY HIPOTRONICS is proud to announce the launch of the Power Frequency Tester, the MAG 1000. The MAG 1000 is a Power Frequency Tester capable of testing all of IEC 61000-4-8. An internal power supply allows the MAG 1000 to be used without any additional external power supplies. A MAG 1000 can help determine if a nearby magnetic field will influence the operational ability … [Read more...]
600V/650V Super Junction N-Channel Power MOSFETs with Improved EMI Performance
Storage & Electronic Devices Solutions Company today announced the launch of 600V/650V super junction N-channel power MOSFETs with improved EMI performance for use in industrial and office equipment. The new “DTMOS V series” will start with a line-up of twelve products. Sample shipments start today with mass production shipments scheduled for the middle of March. The new … [Read more...]
New Probe Features Large Offset Range & DC Voltmeter for Power Integrity Measurements
Rohde & Schwarz introduces a probe with both a large offset range and a DC voltmeter for power integrity measurements. The R&S RT-ZPR20 is a new, extremely low-noise power rail probe with a bandwidth of 2 GHz. Its 1:1 attenuation also ensures very good sensitivity. The large offset range of ± 60 V permits analysis of the smallest disturbance signals during power … [Read more...]
Troubleshooting EFT
EFT Phenomenon Recently I tested a medical device for EFT susceptibility. The requirement is that the medical device must be immune to EFT bursts generated per IEC 61000-4-4. Per this standard EFT bursts are applied in four steps. For level 4, steps 1 and 2 are +/-2kV at 5kHz, and steps 3 and 4 are +/-2kV at 100kHz. For each step, these bursts are applied at 300ms interval for … [Read more...]
Mersen Announces DC Overcurrent Protection Solutions for Electric Vehicles and Battery-Related Applications
Mersen is pleased to announce the expansion of its portfolio of electrical protection components with the availability of a groundbreaking series of DC Overcurrent Protection Solutions for electric vehicles and battery-related applications. Mersen's new Xp and Xs Series hybrid devices and Mersen's expanded line of DC fuses provide complete coverage of the whole DC protection … [Read more...]
AC-DC Power Supplies are Medically Fit to Meet Patient’s Approval
Dengrove Electronic Compoments is now offering the latest RACM range of AC-DC power supplies from RECOM. These latest PSUs are designed for medical applications, with certifications including CE marked and 3rd Edition UL/IEC/EN60601-1 medical certified with 2MOPP/ 250VAC.RACM range of AC-DC power supplies from RECOM. The 40W, 65W and 100W modules offer continuous output … [Read more...]
New Series of Isolated Buck Transformers for Converter Announced
Wurth Electronics Midcom announces the new series of isolated buck transformers for Maxim Integrated’s MAX17681 converter. These pick and placeable transformers, built on self-shielding packages, have small form factor and losses. The high efficiency MAX17681 converter eliminates the need for optocoupler feedback circuits and can deliver up to 3W of output power. The … [Read more...]
RS-485 Transceivers are ESD and Surge Resistant
Analog Devices, Inc. has announced RS-485 transceivers fully certified for Level 4 EMC surge protection. This should eliminate the need for external transient-voltage surge-suppression devices. The galvanically isolated ADM2795E, using Analog Devices iCoupler® magnetic-isolation technology and non-isolated ADM3095E, saves space and component count, speeds up time to market, … [Read more...]
October Released Standards
Reintech Laboratory has published a list of released standards by CENELEC, ETSI, IEC, and others for October 2016. Among them are new amendments for EN 55016 (Euro Norm equivalent of CISPR 16), a preliminary update to EN 61000-3-2 (power line harmonics), ETSI EN 302 537 V2.1.1 (ultra low power medical data service), and ETSI EN 301 559 V2.1.1 (for low power active medical … [Read more...]
All-In-One Validation Kit Compatible with Any SAR System
ART-Fi has recently announced an all-in-one SAR system validation kit compatible with any Specific Absorption Ratio (SAR) measurement system. Compliance labs must perform system verification prior to SAR testing the wireless technologies a device supports. There is also a need to perform regular validation on their SAR systems depending on the lab’s environmental conditions. … [Read more...]
- « Previous Page
- 1
- …
- 21
- 22
- 23
- 24
- 25
- …
- 40
- Next Page »
