The Model C100400 from AR RF/Microwave Instrumentation is a fully contained system for testing RF conducted immunity. It contains all the instruments need to perform conducted immunity testing for the MIL-STD-461D/E, DO 160 D/E, and IEC 61000-4-6 specifications. The system includes a signal generator, a two-channel power meter, and a 100-watt nominal AR amplifier (10 kHz to 400 … [Read more...]
Enclosure Suppresses EMI in Military Airborne Configurations
A highly ruggedized system enclosure from One Stop Systems (OSS) targets military and airborne applications. Constructed of solid seam-welded aluminum, the 11U high enclosure measures 19″ (H) x 25″ x 17″ (W) and weighs 56 pounds. It contains a 3U 15-slot CPCI backplane and features a “floating card that sits within the enclosure and is surrounded by four banks looped cable … [Read more...]
Key EMC Standards on Avionics Available Online
The Vehicular Electronics Laboratory at Clemson University has posted a convenient update on the latest avionics EMC standards on its website. Included are ISO 14302e on “Electromagnetic Compatibility Requirements”, MIL-STD-461F, the “Military Standard for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment”, DO-160F on "Environmental … [Read more...]
Major Aerospace and Defense Cuts
Aerospace giant Boeing has announced that it will shed 10,000 employees, or more than six percent of its workforce. Workforce reductions will involve attrition, retirements, reductions in contract labor, and layoffs. This word of job cuts comes amid media reports of significant cancellations of orders for Boeing’s 787 Dreamliner, once touted as the aircraft that would dominate … [Read more...]
Murata’s EMI Filter Selection Simulator (Ver. 3.5.0)
Murata’s filter experts have updated their filter selection software. It’s now available in version 3.5.0. This revised and improved package will simulate the effects of EMFIL® and chip capacitors.Learn moreabout this valuable tool; then download 6.1 Mbytes of information formaking the right EMI filter choice. … [Read more...]
Software Toolbox Provides Environmental Models Magnetic Field, Gravity, & Atmosphere
Aerospace Toolbox 2.2 from the MathWorks provides reference standards, environment models, and aerodynamic coefficient importing for performing advanced aerospace analysis for developing and evaluating designs. Options for visualizing vehicle dynamics include a six-degrees-of-freedom MATLAB animation object and interfaces to the FlightGear flight simulator and Virtual Reality … [Read more...]
More Aerospace Products
High-Voltage Disc Capacitors Suit Aerospace and Industrial ApplicationsThe Cera-Mite 715CxxKT series, a family of single-layer devices from Vishay Intertechnology, are screw-mount disc capacitors offered in a wide range of diameters and capacitance values over rated voltages from 10 k VDC to 40 k VDC. With low AC and DC coefficients and a negligible … [Read more...]
High-Voltage Disc Capacitors Suit Aerospace and Industrial Applications
AVX HV02-HV06 DIP leaded stack capacitors, SV conformally coated radiated leaded capacitors, and high voltage MLCCs (>/= 1kV) are now available in DO-160 tested versions rendering them suitable for use in flight applications. The typical civilian aircraft is struck by lightning approximately every 1000 flight-time hours, posing a possible threat to increasingly complex and … [Read more...]
Updated Test System Includes New Voltage Spike Requirement of MIL-STD-461F
The Fx-CS106 from EMC Partners is a “plug-and-play extension to its MIG2000-6 test system. This extension updates testing by providing a new waveform that has been defined for all three services and thus replaces the CS06 test that was part of MIL-STD-461C. Its 2/5-µs voltage spike is applicable to single-phase and three-phase AC, as well as DC interfaces. A 2/5- µs can be … [Read more...]
Enclosure Suppresses EMI in Military Airborne Configurations
A highly ruggedized system enclosure from One Stop Systems (OSS) targets military and airborne applications. Constructed of solid seam-welded aluminum, the 11U high enclosure measures 19″ (H) x 25″ x 17″ (W) and weighs 56 pounds. It contains a 3U 15-slot CPCI backplane and features a “floating card that sits within the enclosure and is surrounded by four banks looped cable … [Read more...]
- « Previous Page
- 1
- …
- 537
- 538
- 539
- 540
- 541
- …
- 614
- Next Page »
