ISO 13485:2016 – Medical devices – A practical guide has been authored by technical experts of ISO/TC 210. The handbook is intended to guide organizations in the development, implementation and maintenance of their quality management system in accordance with ISO 13485. Organizations active in the medical device sector, such as manufacturers, importers, distributors, service … [Read more...]
Newly Released EMC Standards (As of September 2017)
The following new EMC-related standards or updates have been published recently: EN 62952-3:2017 - (9/29/2017) - Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module. ETSI EN 303 417 V1.1.1 - (9/2017) - Wireless power transmission systems, using technologies other than radio frequency beam in the 19 - 21 kHz, 59 - 61 kHz, … [Read more...]
Low Insertion Loss Repeatability Electromechanical Relay Switches
Pasternack, a leading provider of RF, microwave and millimeter wave products, has unveiled a new series of low insertion loss repeatability electromechanical switches. Test and measurement applications require signal processing component performance to be highly accurate and repeatable over long periods and under extreme conditions. In automated test systems where … [Read more...]
Economical EMI Shielding Wire Mesh Gaskets Offered With or Without Elastomer Cores
Tech-Etch manufactures EMI shielding knitted wire mesh, which can be used as economical gaskets for EMI/RFI shielding. All knitted mesh configurations are supplied on spools, coils or cut to length as individual gaskets with or without end seals. Standard profiles for a wide variety of applications include round, round with tail, double round with tail, half round (D) and … [Read more...]
New Amplifier Design Tested Tough to Mil Standard 810
Empower's tested and field proven rugged design is common across all our Next Generation Family of amplifiers and is the result of our patented architecture and design goal to minimize RF power losses along the internal signal path, simplify manufacturing and provide for ease of servicing. The consequence of this elegant electro-mechanical compact structural design is a COTS … [Read more...]
Troubleshooting Radiated Immunity for Medical Products – Case Study
Introduction Companies making medical products have much more stringent requirements now that the new IEC 60601-1-2 (Edition 4) became effective June 17, 2017. One of the many changes included increased radiated immunity requirements in several specific wireless and communications bands (Table 1). Highlights of all the changes are included in Interference Technology’s free … [Read more...]
Accelerated RCS Model for Highly Faceted Geometries in EM Simulation Software
Remcom announces a new version of XGtd®, its high frequency antenna analysis software for electrically large platforms. The update introduces a GPU-accelerated radar cross section (RCS) model that greatly speeds calculations while delivering exceptional accuracy for very complex geometries. The new model leverages Remcom’s X3D ray tracing technology, which runs on … [Read more...]
Current-Compensated Ring-Core Chokes for Home Appliances
TDK Corporation presents a new series of EPCOS ring-core double chokes. The new B82721K2*U* series of RoHS-compatible power line chokes have been developed in particular for use in home appliances such as washing machines and dishwashers, refrigerators and heating control units. The plastic used (flame-retardant, compliant with UL 94 V-0) with a CTI value of 600 is certified in … [Read more...]
New RF Connector with Built-in Locking Feature Doesn’t Disengage from PCB
Designers concerned about RF connectors that disengage from the PCB on high shock and vibration applications can rely on a new connector with a built-in locking feature. The new MHF brand I LK Micro RF Coaxial Connector and Wire Harness from I-PEX is designed with a built-in lock that keeps the connector in place on the PCB. Designers no longer have to adhere their RF … [Read more...]
Interstate Connecting Components Exhibiting at 2017 AUSA Expo
Interstate Connecting Components (ICC) will join thousands of armed forces professionals at next month’s Association of the United States Army show in Washington, D.C. Interstate Connecting Components, a division of Heilind Mil-Aero and a leading distributor of military and aerospace connectors, connector accessories, electromechanical products and sensors worldwide, will be … [Read more...]
- « Previous Page
- 1
- …
- 53
- 54
- 55
- 56
- 57
- …
- 650
- Next Page »
