Toyochem Co., Ltd., a member of the Toyo Ink Group, has launched a highly flexible electromagnetic interference (EMI) shielding film, the LIOELM™ TSS510-HF, designed to meet the demanding performance requirements of 5G flexible printed circuits (FPCs). The newly developed TSS510-HF addresses the needs of today’s electronics designers for improved shielding performance for the … [Read more...]
Keysight Enables Major U.S. Mobile Operators to Accelerate 5G with Leading Number of 5G Device Test Cases
Keysight Technologies, Inc. a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, announced that early engagements with all four U.S. mobile operators has resulted in more than 600 validated test cases, which are critical to the operators' respective 5G device acceptance plans, using … [Read more...]
The Emerging Threat of Tactical Electromagnetic Interference & Its Spread into Non-Defense Sectors
During the last five years intentional electromagnetic interference (IEMI) has emerged as a credible and increasingly likely threat to commercial and defence facilities alike, with a potentially crippling cost to individual organizations of such a localized attack. Hollywood has long used electromagnetic interference (EMI) and electromagnetic pulse (EMP) phenomena as the de … [Read more...]
R&S RTP 16 GHz oscilloscopes and Marvell’s 88Q6113 Multiport Multi-Gigabit Automotive Ethernet Switch Meet Wideband Test Requirements
Test and measurement specialist Rohde & Schwarz and semiconductor manufacturer Marvell have demonstrated successfully compliance tests and debugging for high-speed digital interfaces on the 88Q6113 multi-gigabit automotive switch platform. Developments in advanced driver-assistance systems are creating a new approach to in-vehicle network architecture design. With … [Read more...]
The Top Five Reasons Products Fail EMI Testing
Introduction The three top product failures I see constantly in my consulting practice are (1) radiated emissions, (2) radiated susceptibility, and (3) electrostatic discharge. After reviewing and testing hundreds of products over the years, I’ve come to the conclusion that products fail these tests for five common reasons (somewhat in order of incidence); PC Board … [Read more...]
Keysight Delivers New 5G Channel Emulation Solution
Keysight Technologies, Inc. (NYSE: KEYS), a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, has introduced new 5G channel emulation capabilities that enable the deployment of seamless connectivity and end-user experiences. Keysight's PROPSIM FS16 channel emulation solution is the latest … [Read more...]
EMI Pre-Compliance Testing
Introduction This article describes how I perform pre-compliance testing for the top four EMI issues I constantly run into; conducted emissions, radiated emissions, radiated immunity, and electrostatic discharge. Of these, the last three are the most prevalent issues, with radiated emissions typically being the biggest compliance challenge during certification testing. If … [Read more...]
Fairview Microwave Releases New Series of RF Surge Protectors Featuring 4.3-10 Connectors
Fairview Microwave Inc., an Infinite Electronics brand and a leading provider of on-demand RF, microwave and millimeter wave components, has unveiled a new line of coaxial surge protectors created to guard valuable communications equipment from power surges and indirect lightning strikes. Fairview’s new RF surge protectors are offered with either male-to-female or … [Read more...]
New at Heilind Electronics: WAGO LEVER-NUTS 221 Series Compact Splicing Connectors
Heilind Electronics, a premier global distributor of electronic components and an authorized distributor for WAGO, is now offering the manufacturer’s 221 Series compact splicing connectors. These connectors are 40% smaller than WAGO’s 222 Series, providing more junction box space in applications like lighting and home automation. 221 Series connectors are not only … [Read more...]
Harwin Adds to Unique & Highly Adaptable Board Level Shielding
Assisting engineers dealing with EMI/RFI issues in their PCB designs, Harwin has just announced the introduction of three new shielding cans. Supplied in a tape-and-reel format, these cans increase the company’s existing range of EMC products. The new can dimensions are 10 mm x 10 mm, 15 mm x 10 mm, and 30 mm x 10 mm, all with a 3 mm profile height and 0.15 mm thickness … [Read more...]
- « Previous Page
- 1
- …
- 23
- 24
- 25
- 26
- 27
- …
- 650
- Next Page »
