TMD Technologies, a world leader in RF, microwave, and high-power amplifiers has introduced the PTXM9754, an ultra-compact, modular MPM (Microwave Power Module). This unit is ideally suited for high-performance military radar, EW/EA/ECM, and communications systems. It utilizes a ‘super-mini’ TWT (traveling wave tube), a solid-state preamp, and an optimized high-density … [Read more...]
The Vital Role of Simulation for Virtual EMI and EMC Test Environments
Before deploying microwave and millimeter-wave devices and systems within 5G, the Internet of Things (IoT), and high-speed wireless communication, it is essential to predict their performance. This need has increased the demand for virtual test platforms through simulation software. High carrier and system bus frequencies are necessary for high-data-rate communication … [Read more...]
Ensuring Performance of Connected Home Electronic Products
Towards a Connected Home The title of Bob Dylan’s 1964 hit “The Times They Are A-Changin’” certainly holds true for home appliance products. The world of consumer electronics needs to evolve and keep pace with the growing desire of their customers and play a part in enabling the dream of a truly connected world. The Internet of Things (IoT) trend has finally reached our homes. … [Read more...]
Würth Elektronik Introduces its WE-CST EE4.4 Current Sense Transformers
Würth Elektronik expands the product family of WE-CST current sense transformers with the new WE-CST EE4.4 series. An innovative manufacturing process not only makes these current sense transformers extremely small (4.7 x 4.65, 3.55 mm), but also provides better insulation. Their insulation voltage of 750 VAC, is 50 percent higher than that of market competitors. The WE-CST … [Read more...]
Circuit Level Design and Test for the MIL-STD-461 200 V/m RS103 and the DO-160 Radiated Susceptibility Test at 200 V/m
Introduction For Army, Navy, and Air Force military equipment and DO-160 commercial aircraft avionics, radiated susceptibility test levels as high as 200 V/m may be specified. As always, it is better to design immunity to the test levels into equipment than to wait until equipment is completed and then perform tests. This article assumes the worst-case qualification test … [Read more...]
MIL-STD-461G Passive Device Calibration Review
The Requirement: When MIL-STD-461 revision “G” was issued, I believed that the answer to many of my measurement equipment calibration issues had been solved. Right there in the “Calibration of measuring equipment” paragraph the requirements clearly stated: After the initial calibration passive devices such as measurement system antennas, current probes, and LISNs, require no … [Read more...]
Pasternack Introduces New RF Hybrid Couplers with Operating Frequency Range up to 40 GHz
Pasternack, an Infinite Electronics brand and a leading provider of RF, microwave and millimeter-wave products, has just expanded its line of RF hybrid couplers with new models that meet the demands for higher frequency components. Pasternack’s hybrid coupler line expansion consists of 21 new models with a high-frequency operating range of up to 40 GHz for wide-band … [Read more...]
Demystifying EMC in an Electric Vehicle’s Drive Unit
1. Introduction The past decade has witnessed both a leap forward in technology and market expansion of the global electric vehicle (EV) industry [1]. With Tesla leading the market, followed by traditional vehicle original equipment manufacturers (OEMs) such as Volkswagen, PSA, and Toyota, to name just a few, the electrification of the automotive industry has been advancing at … [Read more...]
Test 5G Bands without Massive Cost of New RF Equipment and Time to Train RF Engineers
ThinkRF Corp., the leader in software-defined spectrum analysis, today announced the launch of its new ThinkRF D4000 RF Downconverter/Tuner. The platform is the industry’s first 40 GHz downconverter/tuner that offers a frequency range of 24-40 GHz with up to 500 MHz of real-time bandwidth (RTBW), to capture mmWave 5G signals. Now, engineers can quickly and reliably analyze new … [Read more...]
Heilind Electronics Introduces TE Connectivity’s LUMAWISE Endurance S Connector System
Heilind Electronics, a leading global distributor of electronic components and authorized distributor for TE Connectivity (TE), a global leader in connectivity and sensors, introduces TE Connectivity’s LUMAWISE Endurance S Connector System—an ecosystem of products designed for sensor modules and other control system applications. The sensor-ready components of the LUMAWISE … [Read more...]
- « Previous Page
- 1
- …
- 18
- 19
- 20
- 21
- 22
- …
- 650
- Next Page »
